Husqvarna P-ZT6128 Owners Manual - Page 45
Wheel and Deck Zerks, Front Wheel Mount, Front Wheel Bearings, Deck Spindles
View all Husqvarna P-ZT6128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
LUBRICATION Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Lubricate with a grease gun until the grease is forced out. Front Wheel Bearings Lubricate 3-4 strokes with a grease gun on each set of wheel bearings. Lubricating front wheels Deck Spindles Lower the cutting deck completely. If a grease gun without rubber hose is used, the foot plate must be removed. Lubricate with a grease gun, 2-3 strokes per spindle. Deck spindle 8058-057 8058-058 45
lUbRICaTION
45
Wheel and Deck Zerks
Use Only gOOd quality bearing grease.
Grease frOm well-knOwn brand names (petrOchemical
cOmpanies, etc.) usually maintains a gOOd quality.
Front Wheel Mount
Lubricate with a grease gun until the grease is fOrced
Out.
Front Wheel Bearings
Lubricate 3-4 strOkes with a grease gun On each set Of
wheel bearings.
8058-057
Lubricating front wheels
8058-058
Deck spindle
Deck Spindles
LOwer the cutting deck cOmpletely.
If a grease gun withOut rubber hOse is used, the fOOt
plate must be remOved.
Lubricate with a grease gun, 2-3 strOkes per spindle.