Husqvarna PZ7234FX Owners Manual - Page 51
Wheel and Deck Zerks, Front Wheel Mount, Front Wheel Bearings, Deck Spindle, Cables
View all Husqvarna PZ7234FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
LUBRICATION Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Remove dust cap to expose zerk. Lubricate with a grease gun until the grease is forced out around the top washer. Front Wheel Bearings Lubricate 3-4 strokes with a grease gun on each set of wheel bearings. Lubricating front wheels Deck Spindle Lower the cutting deck completely. If a grease gun without rubber hose is used, the foot plate must be removed. Lubricate with a grease gun, 2-3 strokes per spindle. 8065-032 Deck spindle Cables If possible, grease both ends of the cables and move the controls to end stop positions when lubricating. Refit the rubber covers on the cables after lubrication. Cables with sheaths will bind if they are not lubricated regularly. If a cable binds, it can disrupt operation. If a cable binds, remove the cable and hang it vertically. Lubricate it with light engine oil until the oil begins to escape from the bottom. 8065-033 51