Husqvarna T435 Owners Manual - Page 2
Key To Symbols - chain saw
View all Husqvarna T435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
KEY TO SYMBOLS Symbols on the machine: WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor Choke Other symbols/decals on the machine refer to special certification requirements for certain markets. Symbols in the operator's manual: Switch off the engine before carrying out any checks or maintenance. Both of the operator′s hands must be used to operate the chain saw. Always wear approved protective gloves. Never operate a chain saw holding it with one hand only. Regular cleaning is required. Never let the guide bar tip come in contact with any object. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Recommended cutting equipment in this example: - Bar length 14 inches - Max. nose radius 7 Teeth - Chain type Husqvarna H36 Other approved bar and chain combinations in OperatorÅfs Manual. Measured maximum kickback value without triggering the brake, for the bar and chain combination on the label. Air purge Visual check. Protective goggles or a visor must be worn. Refuelling. Filling with oil and adjusting oil flow. The chain brake must be engaged when the chain saw is started. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Working position 2 - English