Husqvarna Z448 Owner Manual - Page 14
Choke Control, Blade Switch, Service Meter, Seat Adjustment Lever, (Applies to Z400X only)
View all Husqvarna Z448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONTROLS Choke Control Note: The service meter operates (clocks hours) only when the engine is running. Be sure to turn the key off when the unit is not in use, to prevent meter hours from accumulating. Seat Adjustment Lever (Applies to Z400X only) The choke control is used for cold starts to give the engine a richer fuel mixture. For cold starts, pull the control up. Blade Switch The seat can be adjusted lengthways. The lever under the front edge of the seat is moved to the left (as seen by the driver in the seat), to adjust the seat backward or forward. IMPORTANT INFORMATION Seat must not be adjusted while unit is in motion. Fuel Shut Off Valve To engage the mower deck, pull the knob out; mower blades are disengaged when the knob is pressed down. Service Meter The fuel shut off valve is just forward of the rear fuel tank mount bracket. The valve is off when the handle tab is turned perpendicular to the fuel line. Fuses The service meter displays the total number of hours the engine has run and shows when the engine and mower need servicing. After every 50 hours of operation, an oil can icon will appear and stay on for two hours, before an automatic reset occurs. To manually reset the meter, turn the key off and on five times at one second intervals. To service the engine and mower, see the Service Journal of this manual. 14 Fuses are on the left hand side of the machine and are accessed by tilting the seat forward. Fuses are flat pin fuses type as used in automobiles. The 20 A is the primary fuse. The 7.5 A is for the mower deck coupling.