Husqvarna Z560X Owner Manual - Page 14
Ignition Switch, Choke Control, Blade Switch, Service Meter, Fuel Gauges, Fuses - accessories
View all Husqvarna Z560X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONTROLS Ignition Switch Service Meter The ignition switch is used to start and stop the engine. On models equipped with headlights, turn the key clockwise to ACCESSORY for headlight use. Choke Control The service meter is located on the left hand control panel and shows the total operating time with the blades engaged. After every 50 hours of operation, an oil can icon will appear and stay on for two hours, before an automatic reset occurs. To manually reset the meter, turn the key off and on five times at one second intervals. To service the engine and mower, see the Service Journal of this manual. Fuel Gauges The choke control is used for cold starts to provide the engine with a richer fuel mixture. For cold starts, pull the control up. Blade Switch Fuel gauges for each fuel tank are located the right and left control panels. Fuses To engage the mower deck, pull the knob out; mower blades are disengaged when the knob is pressed down. Fuses are located on the left hand side of the machine and are accessed by tilting the seat forward. Fuses are flat pin fuses type as used in automobiles. The 20 A is the primary fuse. The 7.5 A is for the mower deck coupling. The 10 A is for accessories. 14