IBM 09N4291 User Guide - Page 53

Appendices, Appendix A: Firmware Upgrades

Get IBM 09N4291 PDF manuals and user guides View all IBM 09N4291 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

39 APPENDICES Appendices Appendix A: Firmware Upgrades Upgrading the console switch You can upgrade the firmware of the console switch by using a special update utility. This utility automatically configures the port communications settings to enable direct downloading from the connected server. Items needed for the upgrade The following items are required to upgrade the console switch firmware: • Server running Microsoft® Windows® NT®, Windows 95, Windows 98, Windows 2000, Windows 2003 • Available serial port (COM port) on the server • Standard serial cable that connects the switch and the server • Firmware update Upgrading firmware 1. Connect a standard serial cable to a COM port on the server and to the serial connector on the back panel of the switch. Make a note of which COM port you have chosen, then turn on the switch. 2. Go to http://www.ibm.com/pc/support and click on Downloads and drivers. Search on the product name to access the firmware upgrade file. After the download is complete, navigate to the drive where you have saved the firmware update and unzip the file. 3. Double-click to run the file WUpDate.exe. 4. In the window that opens, select the language and COM port. 5. Click Load. 6. After the firmware is updated, the following message displays Download complete. Click Done to exit the window. 7. The switch automatically restarts after the upgrade is completed. Possible error conditions If the download does not execute properly, verify the following: • The COM port is correct. • No other program is currently using the COM port, or that a previous DOS window or shell is open that had used the COM port. • No other copies of the WUpDate utility are currently running.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
39
Appendices
Appendix A: Firmware Upgrades
Upgrading the console switch
You can upgrade the firmware of the console switch by using a special update utility. This utility
automatically configures the port communications settings to enable direct downloading from the
connected server.
Items needed for the upgrade
The following items are required to upgrade the console switch firmware:
•
Server running Microsoft
®
Windows
®
NT
®
, Windows 95, Windows 98, Windows 2000,
Windows 2003
•
Available serial port (COM port) on the server
•
Standard serial cable that connects the switch and the server
•
Firmware update
Upgrading firmware
1.
Connect a standard serial cable to a COM port on the server and to the serial connector on the
back panel of the switch. Make a note of which COM port you have chosen, then turn on
the switch.
2.
Go to http://www.ibm.com/pc/support and click on
Downloads
and drivers
. Search on the
product name to access the firmware upgrade file. After the download is complete, navigate to
the drive where you have saved the firmware update and unzip the file.
3.
Double-click to run the file WUpDate.exe.
4.
In the window that opens, select the language and COM port.
5.
Click
Load
.
6.
After the firmware is updated, the following message displays
Download complete
.
Click
Done
to exit the window.
7.
The switch automatically restarts after the upgrade is completed.
Possible error conditions
If the download does not execute properly, verify the following:
•
The COM port is correct.
•
No other program is currently using the COM port, or that a previous DOS window or shell is
open that had used the COM port.
•
No other copies of the WUpDate utility are currently running.
APPENDICES