IBM 2645 User Guide - Page 68
Loosen the screw on the memory slot cover; then remove, the cover
UPC - 087944413097
View all IBM 2645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Title: C79EGMST CreationDate: 02/10/98 09:24:42 Increasing Memory 3 Loosen the screw on the memory slot cover; then remove the cover. 4 Install the DIMM into the memory slot. Attention To avoid damaging the DIMM, do not touch its contact edge. a Find the notch on the side of the DIMM. b With the notched end of the DIMM toward the right side of the socket, insert the DIMM, at an angle of approximately 20°, into the socket; then press it firmly 1. c Pivot the DIMM until it snaps into place 2 . If you want to install two DIMMs, repeat these steps. 50 IBM ThinkPad 600 User's Reference
Increasing Memory
3
Loosen the screw on the memory slot cover; then remove
the cover
.
4
Install the DIMM into the memory slot.
Attention
To avoid damaging the DIMM, do not touch its contact
edge.
a
Find the notch on the side of the DIMM.
b
With the notched end of the DIMM toward the right side
of the socket, insert the DIMM, at an angle of
approximately 20°, into the socket; then press it firmly
1
.
c
Pivot the DIMM until it snaps into place
2
.
If you want to install two DIMMs, repeat these steps.
50
IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42