IBM 6892 Information Manual - Page 40
System Software, Plug and Play
UPC - 087944421634
View all IBM 6892 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 5. System Software Chapter 5. System Software This section briefly describes some of the system software included with the computer. BIOS The computer uses the IBM basic input/output system (BIOS), which is stored in flash electrically erasable programmable read only memory (EEPROM). Some features of the BIOS are: PCI support according to PCI BIOS Specification 2.1 Microsoft's PCI IRQ Routing Table Plug and Play support according to Plug and Play BIOS Specification 1.1 Advanced Power Management (APM) support according to APM BIOS Interface Specification 1.2 Wake on LAN support Remote Program Load (RPL) and Dynamic Host Configuration Protocol (DHCP) Startable CD-ROM support Flash-over-LAN support Alternate Startup Sequence Enable/disable of system board Ethernet controller IBM Look and Feel - Screen arrangements, etc. ACPI (Advanced Configuration and Power Interfaces) IDE Logical Block Addressing (LBA support) LSA 2.0 support Bootable CD ROM support LS120 support DM BIOS 2.1 (DMI 2.0 compliant) PC97 compliant Plug and Play Support for Plug and Play conforms to the following: Plug and Play BIOS Specification 1.1 and 1.0 Plug and Play BIOS Extension Design Guide 1.0 Plug and Play BIOS Specification, Errata and Clarifications 1.0 Guide to Integrating the Plug and Play BIOS Extensions with system BIOS 1.2 Plug and Play Kit for DOS and Windows POST IBM power-on self-test (POST) code is used. Also, initialization code is included for the on-board system devices and controllers. POST error codes include text messages for determining the cause of an error. For more information, see Appendix D, "Error Codes" on page 69. 28 Copyright IBM Corp. June 1998