IBM 8215 User Guide - Page 35

Installing, diskette, drive

Get IBM 8215 - ThinkCentre M52 Desktop Computer PDF manuals and user guides
UPC - 825633277236
View all IBM 8215 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Note: If you are installing a 3.5-inch hard disk drive you must use a Universal Adapter Bracket, 5.25 to 3.5-inch. You can obtain this bracket from a local computer retailer or by contacting the Customer Support Center. 7. Reinstall the front bezel. 8. Slide the optical drive lock to the unlock position. See "Locating components" on page 11. 9. If you are installing any type of drive other than a serial ATA hard disk drive, make sure the drive that you are installing is set correctly as either a master or a slave device. Note: A serial ATA hard disk drive does not need to be set as either a master or a slave device. If you are installing an optical drive or a parallel ATA hard disk drive, set it as a master device. Refer to the documentation that comes with your drive for master/slave jumper information. 10. For a 3.5-inch drive, install the drive into the Universal Adapter Bracket, 5.25 to 3.5-inch. 11. Install the drive into the bay until it snaps into position. 12. Slide the optical drive lock 1 to the locked position. 13. Pivot the drive bay assembly upward to gain access to the cable connections. 14. Connect at "Connecting drives" on page 21. Installing a diskette drive in bay 3 To install a diskette drive in bay 3, do the following: 1. Open the computer cover. See "Opening the cover" on page 10. Chapter 1. Installing options 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Note:
If
you
are
installing
a
3.5-inch
hard
disk
drive
you
must
use
a
Universal
Adapter
Bracket,
5.25
to
3.5-inch.
You
can
obtain
this
bracket
from
a
local
computer
retailer
or
by
contacting
the
Customer
Support
Center.
7.
Reinstall
the
front
bezel.
8.
Slide
the
optical
drive
lock
to
the
unlock
position.
See
“Locating
components”
on
page
11.
9.
If
you
are
installing
any
type
of
drive
other
than
a
serial
ATA
hard
disk
drive,
make
sure
the
drive
that
you
are
installing
is
set
correctly
as
either
a
master
or
a
slave
device.
Note:
A
serial
ATA
hard
disk
drive
does
not
need
to
be
set
as
either
a
master
or
a
slave
device.
If
you
are
installing
an
optical
drive
or
a
parallel
ATA
hard
disk
drive,
set
it
as
a
master
device.
Refer
to
the
documentation
that
comes
with
your
drive
for
master/slave
jumper
information.
10.
For
a
3.5-inch
drive,
install
the
drive
into
the
Universal
Adapter
Bracket,
5.25
to
3.5-inch.
11.
Install
the
drive
into
the
bay
until
it
snaps
into
position.
12.
Slide
the
optical
drive
lock
±1²
to
the
locked
position.
13.
Pivot
the
drive
bay
assembly
upward
to
gain
access
to
the
cable
connections.
14.
Connect
at
“Connecting
drives”
on
page
21.
Installing
a
diskette
drive
in
bay
3
To
install
a
diskette
drive
in
bay
3,
do
the
following:
1.
Open
the
computer
cover.
See
“Opening
the
cover”
on
page
10.
Chapter
1.
Installing
options
19