IBM 84903bu User Guide - Page 67
Hardware/Firmware
UPC - 000435882073
View all IBM 84903bu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
supports Wake on LAN functions, you can specify a startup sequence for the Wake on LAN functions. You can also specify whether an integrated controller or a PCI adapter has boot precedence. If you enable the boot fail count, the BIOS default settings will be restored after three consecutive failures to find a boot record. You can enable a virus-detection test that checks for changes in the boot record when the server starts. This choice is on the full Configuration/Setup Utility menu only. v Advanced Setup Select this choice to change settings for advanced hardware features. Important: The server might malfunction if these options are incorrectly configured. Follow the instructions on the screen carefully. This choice is on the full Configuration/Setup Utility menu only. - Power Button Select this choice to enable or disable the power-control button. Enabled is the default setting. - Wake-up from Select this choice to choose Normal or the power-control button as the wake-up control. - CPU Options Select this choice to enable or disable Hyper-Threading, the pre-fetch queue, C1 enhanced mode, and no-execute mode memory protection. The default setting for Hyper-Threading is Enabled. - PCI Bus Control Select this choice to view the system resources that are used by the installed PCI, PCI Express, or PCI-X devices. - Baseboard management controller (BMC) settings Select this choice to view information and to change mini baseboard management controller (mini-BMC) settings. - IPMI Specification Version This is a nonselectable menu item that displays the IPMI version. - BMC Hardware/Firmware Version This is a nonselectable menu item that displays the mini-BMC firmware version. - Existing Event Log number This is a nonselectable menu item that displays the number of entries in the system-event log. - BIOS POST Watchdog Enable or disable the mini-BMC POST watchdog. Disabled is the default setting. - POST Watchdog Timeout Set the mini-BMC POST watchdog timeout value. 5 min is the default setting. - LAN Settings Select this choice to view the mini-BMC network configuration information. - System Event Log Select this choice to view the mini-BMC system-event log, which contains all system error and warning messages that have been generated. Use the arrow keys to move between pages in the log. If an optional IBM Remote Chapter 3. Configuring the server 53