IBM A21e Hardware Maintenance Manual - Page 52
Retaining serial numbers, for each step. - drivers
View all IBM A21e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
FRU replacement notices v They are harder to tighten. v They should be used only once. Do the following when you service this machine: v Keep the screw kit (for reference the P/N, see "Miscellaneous parts" on page 96) in your tool bag. v Always use new screws. v Use a torque screwdriver if you have one. Tighten screws as follows: v Plastic to plastic Turn an additional 90 degrees after the screw head touches the surface of the plastic part: v Logic card to plastic Turn an additional 180 degrees after the screw head touches the surface of the logic card: v Torque driver If you have a torque driver, refer to the "Torque" column for each step. v Make sure you use the correct screw. If you have a torque screwdriver, tighten all screws firmly to the torque shown in the table. Never use a screw that you removed. Use a new one. Make sure the screws are tightened firmly. Retaining serial numbers This section includes the following descriptions: v "Restoring the serial number of the system unit" on page 49 v "Retaining the UUID" on page 49 48 ThinkPad A21e