IBM A30p Hardware Maintenance Manual - Page 97
Hinge cover, Attach the hinge cover, aligning the two
![]() |
UPC - 087944784180
View all IBM A30p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
1130 Hinge cover Removing and replacing a FRU For access, remove these FRUs, in order: v "1010 Battery pack" on page 64 v "1070 Ultrabay Plus device" on page 79 v "1080 Ultrabay 2000 device" on page 80 v "1100 Keyboard" on page 82 v "1110 Keyboard CRU insulator" on page 87 v "1120 Keyboard bezel" on page 89 1 a 2 Step 1 Screw (quantity) M2.5 × 4.8 mm, nylon-coated (2) Torque 0.392 Nm (4 kgfcm) When installing: Attach the hinge cover, aligning the two projections on the rear side with the two small square holes of the base cover. (a) ThinkPad A30, A30p, A31, A31p 93
![](/manual_guide/products/ibm-2652-hardware-maintenance-manual-9c93a7d/97.png)
1130 Hinge cover
For access, remove these FRUs, in order:
v
“1010 Battery pack” on page 64
v
“1070 Ultrabay Plus device” on page 79
v
“1080 Ultrabay 2000 device” on page 80
v
“1100 Keyboard” on page 82
v
“1110 Keyboard CRU insulator” on page 87
v
“1120 Keyboard bezel” on page 89
a
1
2
Step
Screw (quantity)
Torque
±1²
M2.5 × 4.8 mm, nylon-coated (2)
0.392 Nm
(4 kgfcm)
When installing:
Attach the hinge cover, aligning the two
projections on the rear side with the two
small square holes of the base cover.
(
±a²
)
Removing and replacing a FRU
ThinkPad A30, A30p, A31, A31p
93