Home » IC Realtime Manuals » Digital Video Recorders » IC Realtime AVR-808S » Manual Viewer

IC Realtime AVR-808S Product Manual - Page 87

Preferred DNS server: DNS server IP address.

View all IC Realtime AVR-808S manuals

Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

HD AVS Standalone DVR User's Manual  Load balance: In this mode, device uses bond0 to communicate with the external device. The eth0 and eth1 are both working now and bearing the network load. Their network load are general the same. The system is shown as offline once these two cards are both offline. Please note these two cards shall be in the same LAN.  Default Network Card: Please select eth0/eth1/bond0(optional) after enable multiple-access function  Main Network Card: Please select eth0/eth1 (optional).after enable multiple access function. Note: Some series support the above three configurations and supports functions as multiple-access, fault-tolerance and load balancing.  IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP address format and you can access via them.  MAC address: The host in the LAN can get a unique MAC address. It is for you to access in the LAN. It is read-only.  IP address: Here you can use up/down button () or input the corresponding number to input IP address. Then you can set the corresponding subnet mask the default gateway.  Default gateway: Here you can input the default gateway. Please note system needs to check the validity of all IPv6 addresses. The IP address and the default gateway shall be in the same IP section. That is to say, the specified length of the subnet prefix shall have the same string.  DHCP: It is to auto search IP. When enable DHCP function, you can not modify IP/Subnet mask /Gateway. These values are from DHCP function. If you have not enabled DHCP function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to view current IP information. Besides, when PPPoE is operating, you can not modify IP/Subnet mask /Gateway.  MTU: It is to set MTU value of the network adapter. The value ranges from 1280-7200 bytes. The default setup is 1500 bytes. Please note MTU modification may result in network adapter reboot and network becomes off. That is to say, MTU modification can affect current network service. System may pop up dialog box for you to confirm setup when you want to change MTU setup. Click OK button to confirm current reboot, or you can click Cancel button to terminate current modification. Before the modification, you can check the MTU of the gateway; the MTU of the DVR shall be the same as or is lower than the MTU of the gateway. In this way, you can reduce packets and enhance network transmission efficiency. The following MTU value is for reference only.  1500: Ethernet information packet max value and it is also the default value. It is the typical setup when there is no PPPoE or VPN. It is the default setup of some router, switch or the network adapter.  1492: Recommend value for PPPoE.  1468: Recommend value for DHCP.  Preferred DNS server: DNS server IP address.  Alternate DNS server: DNS server alternate address. 78

Section	Page
1 FEATURES AND SPECIFICATIONS	10
1.1 Overview	10
1.2 Features	10
1.3 Specifications	11
2 Overview and Controls	17
2.1 Front Panel	17
2.2 Rear Panel	17
2.2.1 AVR-804S/ AVR-808S Series	17
2.2.2 AVR-816S Series	20
2.3 Connection Sample	22
2.4 Remote Control	23
2.5 Mouse Control	25
2.6 Virtual Keyboard & Front Panel	27
2.6.1 Virtual Keyboard	27
2.6.2 Front Panel	27
3 Installation and Connections	28
3.1 Check Unpacked DVR	28
3.2 About Front Panel and Rear Panel	28
3.2.1 HDD Installation	28
3.2.2 Rack Installation	29
3.3 Connecting Power Supply	29
3.4 Connecting Video Input and Output Devices	29
3.4.1 Connecting Video Input	29
3.4.2 Connecting Video Output	30
3.5 Connecting Audio Input & Output, Bidirectional Audio	30
3.5.1 Audio Input	30
3.5.2 Audio Output	30
3.6 Alarm Input and Output Connection	30
3.6.1 Alarm Input and Output Details	31
3.6.2 Alarm Input Port	32
3.6.3 Alarm Output Port	32
3.7 RS485	33
3.8 Other Interfaces	34
4 Overview of Navigation and Controls	35
4.1 Boot up and Shutdown	35
4.1.1 Boot up	35
4.1.2 Shutdown	35
4.1.3 Auto Resume after Power Failure	35
4.1.4 Replace Button Battery	35
4.2 Startup Wizard	36
4.3 Manual Record	38
4.3.1 Live Viewing	38
4.4 Right-Click Menu	41
4.4.1 Window Switch	41
4.4.2 PIP	42
4.4.3 PTZ Control	43
4.4.3.1 PTZ Function Setup	45
4.4.3.2 Call PTZ Function	47
4.4.4 Auto Focus	48
4.4.5 Color	48
4.4.6 Search	50
4.4.7 Manual Record	50
4.4.8 Alarm Output	50
4.4.9 Remote Device	50
4.4.10 Video Matrix	50
4.4.11 Main menu	50
4.5 Navigation Bar	50
4.5.1 Main Menu	51
4.5.2 Output Screen	51
4.5.3 PIP	51
4.5.4 Favorites	51
4.5.5 Channel Tree	53
4.5.6 Tour	54
4.5.7 PTZ	54
4.5.8 Color	54
4.5.9 Search	54
4.5.10 Alarm Status	54
4.5.11 Channel Info	54
4.5.12 Remote Device	55
4.5.13 Network	55
4.5.14 HDD Manager	55
4.5.15 USB Manager	55
4.6 USB Device Auto Pop-up	55
4.7 Main Menu	56
4.8 Operation	56
4.8.1 Search	56
4.8.1.1 Smart Search	61
4.8.1.2 Accurate playback by time	61
4.8.1.3 Mark Playback	62
4.8.2 Backup	64
4.8.3 Shut Down	66
4.9 Information	66
4.9.1 System Info	66
4.9.1.1 HDD Information	67
4.9.1.2 Record Info	68
4.9.1.3 BPS	69
4.9.1.4 Version	69
4.9.2 Event	70
4.9.3 Network	70
4.9.3.1 Online Users	70
4.9.3.2 Network Load	71
4.9.3.3 Network Test	72
4.9.4 Log	73
4.10 Setting	74
4.10.1 Camera	74
4.10.1.1 Remote Device (For digital channel only)	74
4.10.1.1.1 Remote Device	74
4.10.1.1.2 Channel Status	76
4.10.1.1.3 Firmware	77
4.10.1.1.4 Remote Upgrade	77
4.10.1.2 Camera	78
4.10.1.3 Encode	80
4.10.1.3.1 Video	80
4.10.1.3.2 Snapshot	81
4.10.1.3.3 Overlay	82
4.10.1.3.4 Channel Name	83
4.10.1.3.5 Channel Type	84
4.10.2 Network	86
4.10.2.1 TCP/IP	86
4.10.2.2 Connection	89
4.10.2.3 WIFI	89
4.10.2.4 3G	90
4.10.2.5 PPPoE	91
4.10.2.6 DDNS Setup	92
4.10.2.7 IP Filter	94
4.10.2.8 Email	95
4.10.2.9 FTP	96
4.10.2.10 UPnP	98
4.10.2.11 SNMP	99
4.10.2.12 Multicast	100
4.10.2.13 Auto register	102
4.10.2.14 Alarm Centre	103
4.10.2.15 P2P	103
4.10.3 Event	104
4.10.3.1 Detect	104
4.10.3.1.1 Motion Detect	104
4.10.3.1.2 Video Loss	108
4.10.3.1.3 Tampering	109
4.10.3.2 Alarm	110
4.10.3.3 Abnormality	115
4.10.3.4 Alarm Output	117
4.10.4 Storage	118
4.10.4.1 Schedule	118
4.10.4.1.1 Record	118
4.10.4.1.1.1 Quick Setup	121
4.10.4.1.1.2 Redundancy	121
4.10.4.1.2 Snapshot	122
4.10.4.1.2.1 Schedule Snapshot	122
4.10.4.1.2.2 Trigger Snapshot	123
4.10.4.1.2.3 Priority	125
4.10.4.1.2.4 Image FTP	125
4.10.4.2 HDD Manager	126
4.10.4.3 Record	126
4.10.4.3.1 Record Control	127
4.10.4.3.2 Snapshot Operation	127
4.10.4.4 Advanced	128
4.10.4.4.1 HDD	128
4.10.4.5 Quota	130
4.10.4.6 HDD Detect	131
4.10.4.6.1 Manual Detect	132
4.10.4.6.2 Detect Report	132
4.10.5 System	134
4.10.5.1 General	134
4.10.5.1.1 Device	134
4.10.5.1.2 Date and Time	135
4.10.5.1.3 Holiday	136
4.10.5.2 Display	137
4.10.5.2.1 Display	137
4.10.5.2.2 TV Adjust	138
4.10.5.2.3 Tour	139
4.10.5.2.4 Zero-channel Encoding	140
4.10.5.2.5 Favorites	141
4.10.5.3 Video Matrix	142
4.10.5.4 RS232	143
4.10.5.5 PTZ	144
4.10.5.6 ATM/POS	145
4.10.5.6.1 COM Type	146
4.10.5.6.2 Network Type	146
4.10.5.7 Voice	148
4.10.5.7.1 File List	148
4.10.5.7.2 Schedule	149
4.10.5.8 Account	149
4.10.5.8.1 Add/Modify Group	151
4.10.5.8.2 Add/Modify User	152
4.10.5.9 Auto Maintain	153
4.10.5.10 Config Backup	154
4.10.5.11 Default	155
4.10.5.12 Update	156
5 WEB OPERATION	157
5.1 Network Connection	157
5.2 Login	157
5.3 LAN Mode	158
5.4 Real-time Monitor	160
5.5 PTZ	161
5.6 Image/Relay-out	162
5.6.1 Image	162
5.6.2 Relay output	162
5.7 WAN Login	163
5.8 Setup	164
5.8.1 Camera	164
5.8.1.1 Remote Device	164
5.8.1.2 Conditions	166
5.8.1.3 Encode	167
5.8.1.3.1 Encode	167
5.8.1.3.2 Snapshot	169
5.8.1.3.3 Video Overlay	169
5.8.1.3.4 Path	170
5.8.1.4 Channel Name	171
5.8.2 Network	171
5.8.2.1 TCP/IP	171
5.8.2.2 P2P	172
5.8.2.3 Connection	172
5.8.2.4 WIFI	173
5.8.2.5 3G	174
5.8.2.5.1 CDMA/GPRS	174
5.8.2.5.2 Mobile	174
5.8.2.6 PPPoE	175
5.8.2.7 DDNS	175
5.8.2.8 IP filter	177
5.8.2.9 Email	177
5.8.2.10 FTP	179
5.8.2.11 UPnP	179
5.8.2.12 SNMP	180
5.8.2.13 Multicast	181
5.8.2.14 Auto Register	181
5.8.2.15 Alarm Centre	182
5.8.2.16 HTTPS	182
5.8.2.16.1 Create Server Certificate	182
5.8.2.16.2 Download root certificate	183
5.8.2.16.3 View and set HTTPS port	186
5.8.2.16.4 Login	186
5.8.3 Event	187
5.8.3.1 Video detect	187
5.8.3.1.1 Motion Detect	187
5.8.3.1.2 Video Loss	190
5.8.3.1.3 Tampering	190
5.8.3.2 Alarm	191
5.8.3.2.1 Local Alarm	191
5.8.3.2.2 Net Alarm	193
5.8.3.3 Alarm Output	194
5.8.3.4 Abnormality	194
5.8.4 Storage	195
5.8.4.1 Schedule	195
5.8.4.2 Local Storage	197
5.8.4.2.1 HDD Setting	197
5.8.4.3 Manual Record	198
5.8.4.4 Advanced	199
5.8.4.4.1 HDD	199
5.8.4.4.2 Main Stream	199
5.8.4.4.3 Sub Stream	199
5.8.4.4.4 Snapshot	200
5.8.5 System	200
5.8.5.1 General	200
5.8.5.1.1 General	200
5.8.5.1.2 Date and time	201
5.8.5.1.3 Holiday Setup	202
5.8.5.2 Display	203
5.8.5.2.1 GUI	203
5.8.5.2.2 TV Adjust	203
5.8.5.2.3 Tour	204
5.8.5.2.4 Zero-channel Encoding	204
5.8.5.3 Video Matrix	205
5.8.5.4 RS232	206
5.8.5.5 PTZ	206
5.8.5.6 ATM/POS	207
5.8.5.6.1 COM Type	207
5.8.5.6.2 Network Type	208
5.8.5.7 Voice	209
5.8.5.7.1 File List	209
5.8.5.7.2 Schedule	209
5.8.5.8 Account	210
5.8.5.8.1 User name	210
5.8.5.8.2 Group	212
5.8.5.9 Auto maintain	214
5.8.5.10 Import/Export	214
5.8.5.11 Default	214
5.8.5.12 Upgrade	215
5.9 Information	215
5.9.1 Version	215
5.9.2 Log	215
5.9.3 Connection Log	216
5.9.4 Online User	217
5.10 Playback	217
5.11 Alarm	221
5.12 Log out	222
5.13 Un-install Web Control	223
6 Professional Surveillance System	224
7 FAQ	225
Appendix A HDD Capacity Calculation	233
Appendix B Compatible backup devices	235
Appendix B-1 Compatible USB list	235
Appendix B-2 Compatible SD Card list	236
Appendix B-3 Compatible Portable HDD list	236
Appendix B-4 Compatible USB DVD List	236
Appendix B-5 Compatible SATA DVD List	236
Appendix B-6 Compatible SATA HDD List	237
Appendix C Compatible CD/DVD Burner List	241
Appendix D Compatible Displayer List	242
Appendix E Compatible Switcher	243
Appendix F Compatible Wireless Mouse List	244
Appendix G Earthing	245

Match case Limit results 1 per page

HD AVS

Standalone DVR User’s Manual



Load balance: In this mode, device uses bond0 to communicate with the external

device. The eth0 and eth1 are both working now and bearing the network load.

Their network load are general the same. The system is shown as offline once

these two cards are both offline. Please note these two cards shall be in the same

LAN.



Default Network Card: Please select eth0/eth1/bond0(optional) after enable

multiple-access function



Main Network Card: Please select eth0/eth1 (optional).after enable multiple

access function.

Note: Some series support the above three configurations and supports

functions as multiple-access, fault-tolerance and load balancing.



IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two

IP address format and you can access via them.



MAC address: The host in the LAN can get a unique MAC address. It is for you to access

in the LAN. It is read-only.



IP address: Here you can use up/down button (



) or input the corresponding

number to input IP address. Then you can set the corresponding subnet mask the

default gateway.



Default gateway: Here you can input the default gateway. Please note system needs

to check the validity of all IPv6 addresses. The IP address and the default gateway

shall be in the same IP section. That is to say, the specified length of the subnet prefix

shall have the same string.



DHCP: It is to auto search IP. When enable DHCP function, you can not modify

IP/Subnet mask /Gateway. These values are from DHCP function. If you have not

enabled DHCP function, IP/Subnet mask/Gateway display as zero. You need to

disable DHCP function to view current IP information.

Besides, when PPPoE is

operating, you can not modify IP/Subnet mask /Gateway.



MTU: It is to set MTU value of the network adapter. The value ranges from 1280-7200

bytes. The default setup is 1500 bytes. Please note MTU modification may result in

network adapter reboot and network becomes off. That is to say, MTU modification

can affect current network service. System may pop up dialog box for you to confirm

setup when you want to change MTU setup. Click OK button to confirm current reboot,

or you can click Cancel button to terminate current modification. Before the

modification, you can check the MTU of the gateway; the MTU of the DVR shall be the

same as or is lower than the MTU of the gateway. In this way, you can reduce packets

and enhance network transmission efficiency.

The following MTU value is for reference only.



1500: Ethernet information packet max value and it is also the default value. It is

the typical setup when there is no PPPoE or VPN. It is the default setup of some

router, switch or the network adapter.



1492: Recommend value for PPPoE.



1468: Recommend value for DHCP.



Preferred DNS server: DNS server IP address.



Alternate DNS server: DNS server alternate address.