IC Realtime EL-3000N Product Manual - Page 10
Functions and operation, Troubleshooting
View all IC Realtime EL-3000N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. Functions and operation 8-9. DISPLAY [MENU] FOCUS EXPOSURE WHITE BALANCE IMAGE INTELLI GENCE SPECIAL FUNC DISPLAY [EXIT] [SAVE] [DFLT] [DISPLAY] DISP SEL INIT SEL SET TITLE SET INIT MSG LANGUAGE SETUP STATUS ENGLISH [EXIT] [SAVE] [DFLT] (1) DISP SEL : Select display item. - ID : OFF/ ON - TITLE : OFF/ ON - ZOOM RATIO : OFF/ON (2) INIT SEL : Select items to display on the screen on initializing time after power-on. - ID : OFF/ ON - BAUD RATE : OFF/ ON - PROTOCOL : OFF/ ON - VERSION : OFF/ ON (3) SET TITLE : Select camera title menu (Text edit). (4) SET INIT MSG : Select camera initial message menu (Text edit). (5) LANGUAGE : Select language. -ENGLISH/ KOREAN (6) SETUP STATUS : Show the setup status of CURRENT OSD menu and compare the each value with the one of the FACTORY default. 18 9. Troubleshooting If there are problems in operating, please refer to the checklist below. If the problem persists, please contact the agent where this product is purchased. Problems Troubleshooting Nothing appears on the screen. · Please check that the power cord and line connection between the camera and monitor are fixed properly. · Please check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the screen is dim. · Is lens stained with dirt? Clean your lens with soft, clean cloth. · Set the monitor to proper condition. · If the camera is exposed to too strong light, change the camera position. The image on the screen is dark. The camera is not working properly, and the surface of the camera is hot. The DAY/NIGHT menu does not work. The DSS function does not work. · Adjust the contrast feature of the monitor. · If you have an intermediate device, GGGG^\ȳGVGoTG (Please check the impedance) · Please check that you have properly connected the camera to an appropriate power source. · Please check if DAY NIGHT menu is set to 'AUTO'. · Please check that the mode of EXPOSURE SETUP menu is set to 'SHUT.P' or 'MANUAL'. The MOTION DETECTION function is not working. Color is not correct. The screen flickers continually. · Please check if MOTION DETECTION function is turned on. · Please check if MD sensitivity is too low. · Please check the setting of the MD area. · Please check the setting of WHITE BALANCE SETUP menu . · Please check that direction of camera turns toward the Sun. 19