IC Realtime HDVR-EL1616-2U4K1-WEB Product Manual - Page 75
Configuring TV
View all IC Realtime HDVR-EL1616-2U4K1-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Figure 5-40 Step 2 Configure the settings for the zero-channel parameters. See Table 5-17. Parameter Description Enable Enable zero-channel function. Compression In the Compression list, select the video compression standard according to the device capability. The default is H.265. Resolution In the Resolution list, select the video resolution. The default is 704×576 (D1). Frame Rate (FPS) Select a value between 1 and 25 for PAL standard, and between 1 and 30 for NTSC standard. The actual arrange is decided and selected dependent on the Device capability. Bit Rate (Kb/S) The default value is 1024Kb/S. The actual arrange is decided and selected dependent on the Device capability and frame rate. Table 5-17 Step 3 Click Apply to save the settings. In the live interface on the web, click multi-channel modes, and then you can view the local video image. to select one of the 5.2.6.4 Configuring TV Not all models support this function. Local Configurations 64