IC Realtime IPEG-D40V-IRW1 Product Manual - Page 11

2 Network Configuration Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For more information, see the WEB operation manual.  Device initialization is available on select models, and it is required at first use and after device is being reset.  Device initialization is available only when the IP addresses of the device (192.168.1.108 by default) and the PC stays in the same network segment.  Planning useable network segment properly to connect the device to the network.  The following figures and interfaces are for reference only, and the actual product shall prevail. 2.1 Modifying Device IP Address  You can modify IP address of one or multiple devices in one time. This section is based on modifying IP addresses in batch.  Modifying IP addresses in batch is available only when the corresponding devices have the same login password. Follow to in to search devices in your network segment. After clicking Search setting, please make sure the username and password are the same as what you set during initialization, otherwise there will be "wrong password" notice. Select the devices which IP addresses need to be modified, and then click Modify IP. The Modify IP Address interface is displayed. See Figure 2-1. Network Configuration 4