IC Realtime KB300 Product Manual - Page 26

5 Keyboard Control NVS 5.1 Connection Connect the network cable to the RJ45 network port of the keyboard, now you can implement network control and upgrade. 5.2 Keyboard Setup a) On the keyboard to set control point setup, Please refer to chapter 2.3.2. The link type shall be NET. Note  Please input NVS IP address and the default port value is 37777.  The protocol usually is DH-2. It is the network keyboard and the 2nd control keyboard protocol. The DVR COM protocol is network keyboard protocol. b) After the setup, click 【ESC】 to exit. 5.3 Operation 5.3.1 Login a) You can use ID, device name, or IP address to login the device. b) On the keyboard click 【ENTER】, you can go to the menu option interface. c) Select control point. d) Input ID, device name, or IP address and then click 【ENTER】 to search.  System automatically connects to the NVS if the search is successful. Please note you need to input corresponding administrator password of the NVS to login. See Figure 2-10.  You can see the corresponding dialogue box such as the "IP address does not exist. Please input again!" Please check the information and input again. Tips On the keyboard click 【ID】and then input ID, click 【ENTER】 button to quickly find ID and connect to the device you want to control. 5.3.2 Exit On the keyboard click 【ID】 and then click 【ESC】, you can exit menu. 5.3.3 1-Window/Multiple-Window Switch  On the keyboard, click a number and 【AUX】 at the same time to select corresponding VGA port number. For example, click number 【1】and【AUX】 to go to video from the VGA 1.  On the keyboard, click a number and 【CAM】 at the same time, you can go to the specified channel. For example, click number 【1】and【CAM】 to go the channel 1.Or you can click a number and 【SETUP】 to go to a channel. But the value here ranges from 1 to 9. That is to say, you can go to channel 1-channel 9 only. 20