IC Realtime NVR-708N Product Manual - Page 181
In the Windows OS, From Start->Control Panel
View all IC Realtime NVR-708N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Parameter Anonymity User Name Password Sender Authentication (Encryption mode) Subject Attachment Receiver Interval Health mail enable Update period (interval) Email test Function For the server supports the anonymity function. You can auto login anonymously. You do not need to input the user name. password and the sender information. The user name of the sender email account. The password of sender email account. Sender email address. You can select SSL or none. Input email subject here. System can send out the email of the snapshot picture once you check the box here. Input receiver email address here. Max three addresses. It supports SSL, TLS email box. The send interval ranges from 0 to 3600 seconds. 0 means there is no interval. Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion detection or the abnormity event activates the email, system sends out the email according to the interval you specified here. This function is very useful when there are too many emails activated by the abnormity events, which may result in heavy load for the email server. Please check the box here to enable this function. This function allows the system to send out the test email to check the connection is OK or not. Please check the box to enable this function and then set the corresponding interval. System can send out the email regularly as you set here. The system will automatically sent out a email once to test the connection is OK or not .Before the email test, please save the email setup information. 5.8.2.10 UPnP It allows you to establish the mapping relationship between the LAN and the public network. Here you can also add, modify or remove UPnP item. See Figure 5-37. In the Windows OS, From Start->Control Panel->Add or remove programs. Click the "Add/Remove Windows Components" and then select the "Network Services" from the Windows Components Wizard. Click the Details button and then check the "Internet Gateway Device Discovery and Control client" and "UPnP User Interface". Please click OK to begin installation. Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the NVR can auto detect it via the "My Network Places" 170