Icom A25 Instruction Manual - Page 16

6 SPECIFICATIONS AND OPTIONS ■■Specifications All stated specifications are subject to change without notice or obligation. DDGeneral ••Frequency range: IC-A25N/IC-A25NE TX 118.000 ~ 136.99166 MHz RX 108.000 ~ 136.99166 MHz WX 161.650 ~ 163.275 MHz*1 IC-A25C/IC-A25CE TX 118.000 ~ 136.99166 MHz RX 118.000 ~ 136.99166 MHz WX 161.650 ~ 163.275 MHz*1 ••Channel spacing: 25 kHz/8.33 kHz ••Mode: 6K00A3E/5K60A3E ••Number of memory channels: 300 channels ••Antenna impedance: 50 ˘ nominal ••Antenna connector: BNC type ••Power supply requirement: 7.2 V DC standard or 11.0 V DC at the external DC jack ••Current drain: TX Less than 1.8 A RX 90 mA typical (at standby) Less than 500 mA (at AF maximum) ••Operating temperature range: IC-A25N/IC-A25C -10˚C to +60˚C, 14˚F to +140˚F IC-A25NE/IC-A25CE -20˚C to +55˚C ••Dimensions:(projections not included) 58.9 (W) × 148.4 (H) × 31.8 (D) mm, 2.3 (W) × 5.8 (H) × 1.3 (D) inches ••Weight (approximately): 384 g, 13.6 oz with antenna and 11 BP-288 DDTransmitter ••Output power: ••Modulation limiting : ••Audio harmonic distortion: ••Ham and Noise ratio: ••Spurious emissions: ••Frequency stability 6.0 W (PEP) typical 70 to 100% Less than 10% (at 60% modulation) More than 35 dB More than 46 dB*2 *3 ±0.4 kHz DDReceiver ••Receive system: Double conversion superheterodyne ••Intermediate frequencies: 1st 46.35 MHz, 2nd 450 kHz ••Sensitivity: VOR/COM Less than 0 dBu (at 6 dB S/N) WX Less than -8 dBu (at 12 dB SINAD) ••Squelch sensitivity (Threshold) VOR/COM Less than 0 dBu WX Less than -5 dBu ••Spurious response rejection ratio: VOR/COM More than 60 dB WX More than 30 dB ••Audio output power: More than 350 mW at 10% distortion into a 8 ˘ load *1 For only the USA version. *2 Except operating frequency ±62.5 kHz in 25 kHz channel spacing. *3 Except operating frequency ±20.825 kHz in 8.33 kHz channel spacing.