Icom IC-7000 Service Manual - Page 15
MAIN CPU LOGIC UNIT; IC1302, I/O port for the EEPROM IC1301. - reset
View all Icom IC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3-6-2 MAIN CPU (LOGIC UNIT; IC1302) Pin Port number name Description 26 CYDT Outputs data signal for the clock generator (IC1201) for display control. 27 CYCK Outputs clock signal for the clock generator (IC1201) for display control. I/O port for the data signal from/to the 29 RTCDT clock IC (IC1304) for clock indication and timer function. Outputs clock signal for the clock IC 30 RTCCK (IC1304) for clock indication and timer function. 42 LOST Outputs strobe signal for the D/A converter (DDS unit; IC901). Outputs strobe signal for the D/A 43 MST converter ICs (MAIN unit; IC2151- IC2154). Input port for the data signal from the 46 MMDK microphone that is connected to the rear [MIC] connector. 47 DRES Outputs the reset signal for the DSP ICs (IC301, IC2201). Outputs the reset signal for the LCD 48 PRES# controller (IC1226) and DDS IC (DDS unit; IC301). Outputs the squelch control signal for 49 SQSS the ACC connector and connected microphone. Outputs clock signal for the D/A 51 MCK converter ICs (MAIN unit; IC2151- IC2154). Outputs serial data signal for the D/A 52 MDT converter ICs (MAIN unit; IC2151- IC2154). Outputs the signal for H SEND or V 57 SDSS SEND selection. High: While V SEND is selected. 58 TDAT • Outputs data signal for AT-180. • Outputs start signal for AH-3/AH-4. 81 DTXD Outputs data signal for the DSP IC (IC301). 82 DRXD Input port for data signal from the DSP IC (IC301). Outputs the TX band signal. 83 2T8V High: While transmitting the 144 MHz band. Outputs the TX band signal. 104 4T8V High: While transmitting the 430 MHz band. Outputs R8 regulator (Q1701, Q1702) 105 RXS control signal. Low : While receiving. Outputs T8 regulator (Q1703, Q1704) 106 TXS control signal. Low :While transmitting. 107 POWS Outputs the power control signal . High:When IC-7000 is power ON. Pin number Port name Description 109 ECK Outputs clock signal to the EEPROM (IC1301). 110 EDT I/O port for the EEPROM (IC1301). 113 FORL Input port for the forward voltage. 114 REFL Input port for the reflection voltage . 115 ALCL Input port for ALC level. Input port for PTT control signal 116 SNDL from the FRONT unit or ACC con- nector. 117 DPTL Input port for PTT control signal from the DATA connector. 118 THML Input port for the temperature detection signal. Input port for [UP] and [DN] switch- 119 MUDL es from the optional microphone (HM-103, SM-20) that is connected to the rear [MIC] connector. 121, 122 DASK, DOTK Input ports for [KEY] jack. 124 MMSL Input port for the HM-151 connection detection. 127 TKEY Input port for tuner ON. 128 TRD Input port for the detected signal for the tuner unit connection. 133 LTXD Outputs data signal to the sub CPU (DISPLAY unit; IC2003). 134 LRXD Inputs data signal from the sub CPU (DISPLAY unit; IC2003). 135 PWRK Input port for [PWR] key. Low : While [PWR] key is pushed. Outputs strobe signal to the DDS 137 3DST IC (DDS unit; IC51) for the 3rd LO signal. Outputs clock signal for the DDS 138 PCK ICs (DDS unit; IC51, IC301) and D/A converter (DDS unit; IC901). Output strobe signal to the DDS IC 140 1DST (DDS unit; IC301) for the 1st LO signal. Outputs serial data signal for the 142 PDT DDS ICs (DDS unit; IC51, IC301) and D/A converter (DDS unit; IC901). 3 - 10