Icom IC-7100 Instruction Manual - Page 87
ON Default - split tone operation
View all Icom IC-7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
SET MODE 6 Set mode items and Default settings (Continued) NOTE: The default settings shown below in bold are for the USA version. The default settings may differ, depending on your transceiver version. Function Monitor Monitor Level Beep Level In this item, set the function options. OFF or ON 0%~50%~100% 0%~50%~100% Selects whether or not to monitor your transmit signal in any mode other than CW. Sets the monitor level. Sets the beep output level. Beep Level Limit Beep (Confirmation) Band Edge Beep User Band Edge RF/SQL Control TX Delay HF 50M 144M 430M Time-Out Timer PTT Lock SPLIT/DUP Quick SPLIT SPLIT Offset SPLIT LOCK DUP Offset One Touch Repeater Auto Repeater Tuner Auto Start OFF or ON Selects whether or not to limit the volume to the specified level, and further rotation of the [AF] control will not increase the level. OFF or ON Turns the confirmation beep tones ON or OFF. OFF, ON (Default), ON (User) or ON Selects whether or not to sound a beep when you (User) & TX Limit tune outside of, or back into the amateur band's frequency range. 1: 1.800.000-1.999.999 Selects the user band frequency range to sound 2: 3.500.000-3.999.999 a beep when the Band Edge Beep function is 3: 5.255.000-5.405.000 set to "ON (User)" or "ON (User) & TX Limit," and 4: 7.000.000-7.300.000 you tune outside of, or back into a programmed 5: 10.100.000-10.150.000 range. 6: 14.000.000-14.350.000 7: 18.068.000-18.168.000 8: 21.000.000-21.450.000 9: 24.890.000-24.990.000 10: 28.000.000-29.700.000 11: 50.000.000-54.000.000 12: 144.000.000-148.000.000 13: 430.000.000-450.000.000 14~30: (blank) Auto, SQL or RF+SQL Select the function of the [RF/SQL] control. OFF, 10ms, 15ms, 20ms, 25ms or Sets the transmission's timing of the IC-7100 to 30ms prevent any external equipment that is connected from damage by the transmitted RF. OFF, 10ms, 15ms, 20ms, 25ms or See HF above. 30ms OFF, 10ms, 15ms, 20ms, 25ms or See HF above. 30ms OFF, 10ms, 15ms, 20ms, 25ms or See HF above. 30ms OFF, 3min, 5min, 10min, 20min or Selects the Time-Out Timer time options to pre- 30min vent an accidental prolonged transmission. OFF or ON Selects whether or not to inhibit transmission. OFF or ON Turns the Quick SPLIT function ON or OFF. -9.999 MHz~0.000 MHz~+9.999 MHz Sets the frequency offset for the Split function. OFF or ON Turns the SPLIT LOCK function ON or OFF. 0.0000 MHz~9.9999 MHz Sets the frequency offset for repeater operation. (The default value may differ, depend- ing on the frequency band and the transceiver version.) DUP- or DUP+ Selects the duplex direction for the One Touch Repeater function. OFF, ON (DUP) or ON (DUP,TONE) Turns the Auto Repeater function ON or OFF. OFF or ON Turns the automatic antenna tuner function ON or OFF. 6-5