15-13
15
SET MODE
Calibration Marker
(Default:
OFF
)
Turns the reference frequency calibration marker ON or
OFF.
• OFF:
Turns OFF the marker.
• ON:
Turns ON the marker.
Beep (Confirmation)
(Default:
ON
)
Turns the confirmation beep ON or OFF.
• OFF:
Turns OFF the beep.
• ON:
Sounds the beep when a key is pushed.
If the Beep Level is set to "0%" on the [LEVEL
SET] screen, no beep sounds.
Beep (Band Edge)
(Default:
ON (Default)
)
Turns the band edge beep ON or OFF.
If the Beep Level is set to "0%" on the [LEVEL SET]
screen, no beep sounds.
• OFF:
Turn OFF the band edge beep.
• ON(Default):
Beep sounds on the band edge.
• ON(User):
The beep, which is selected in the [BAND EDGE]
window, sounds. (p. 4-15, P4-16)
• ON(User) & TX Limit:
The beep, which is selected in the [BAND EDGE]
window, sounds. The transmitting frequency is limited in
the range between upper and lower band edge.
(p. 4-15, p. 4-16)
Beep Sound (MAIN)
(Default:
1000Hz
)
Sets the key-touch beep frequency on the Main band.
• Range:
500 Hz–2000 Hz (in 10 Hz steps)
If the Beep Level is set to "0%" on the [LEVEL SET]
screen no beep sounds.
Beep Sound (SUB)
(Default:
1000Hz
)
Sets the key-touch beep frequency on the Sub band.
• Range:
500Hz–2000Hz (in 10 Hz steps)
If the Beep Level is set to "0%" on the [LEVEL SET]
screen no beep sounds.
■
Others set mode
TX Power Limit
(Default:
ON
)
Turns the TX power limit function ON or OFF.
• OFF:
Turn OFF the function.
• ON:
Limits the TX power for each mode and
band.
The [TX POWER] screen is displayed when
[LIMIT] is pushed. Adjust the power limit to
between <5 W and 200 W for each selected
band.
TX Delay (HF)
(Default:
OFF
)
Sets the TX delay time on the HF bands.
• Options:
OFF, 10ms, 15ms, 20ms, 25ms, 30ms
• If the connected equipment's rise time is slower than
that of the IC-7850, a reflected wave is produced and
it may damage the IC-7850. To prevent this, set the
appropriate delay time so that no reflected wave is
produced.
• Select "OFF" for no rise speed.
TX Delay (50M)
(Default:
OFF
)
Sets the TX delay time on the 50 MHz band.
• Options: OFF, 10ms, 15ms, 20ms, 25ms, 30ms
• If the connected equipment's rise time is slower than
that of the IC-7850, a reflected wave is produced and
it may damage the IC-7850. To prevent this, set the
appropriate delay time so that no reflected wave is
produced.
• Select "OFF" for no rise speed.
Time-Out Timer (CI-V)
(Default:
OFF
)
Sets the Time-out Timer for CI-V operation.
This setting is valid only transmitting initiated by a CI-V
command and pushing [TRANSMIT].
• Options: OFF, 3, 5, 10, 20 or 30 minutes
Select "OFF" for no time limit.
Quick Dualwatch
(Default:
ON
)
Turns the Quick Dualwatch function ON or OFF.
• OFF:
Turn OFF the function.
• ON:
Turn ON the function.
Quick SPLIT
(Default:
ON
)
Turns the Quick Split function ON or OFF.
• OFF:
Turn OFF the function.
• ON:
Turn ON the function.