Icom IC-A14 Instruction Manual - Page 27
n Key touch beep tone, n ANL function
View all Icom IC-A14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
OTHER FUNCTIONS 6 n Key touch beep tone n ANL function 1 The beep tone, which sounds at the push of a switch can be The ANL (Automatic Noise Limiter) function reduces noise 2 set, if desired. For IC-A14 components such as that caused by engine ignition systems 3 while receiving. 4 Push [FUNC] then push [BEEP](8) to turn the key touch beep tone ON and OFF. For IC-A14 Push [FUNC] then push [ANL](1) to turn the ANL func- 5 • Key touch beep setting is displayed briefly. tion ON/OFF. 6 For IC-A14S • "ANL" indicator appears when the ANL function is ON. 7 q Rotate [VOL] to turn the transceiver power OFF. w While pushing and holding [Y]/[Z], rotate [VOL] to enter 8 set mode. 9 e Push [MR] several times to select the key touch beep item, "BEEP." "ANL" indicator appears when the ANL function is in use. 10 r Push [Y]/[Z] to select the desired condition from ON 11 and OFF. t Push [CLR] to return to frequency mode. For IC-A14S q Rotate [VOL] to turn the transceiver power OFF. 12 w While pushing and holding [Y]/[Z], rotate [VOL] to enter 13 set mode. e Push [MR] several times to select the ANL item, "ANL." 14 r Push [Y]/[Z] to select the desired condition from ON 15 and OFF. • "ANL" indicator appears when the ANL function is ON. 16 t Push [CLR] to return to frequency mode. 17 18 19 22