Icom IC-A25N Full Manual - Page 26

Scan types, Using the Scan function - nav com transceiver

Get Icom IC-A25N PDF manuals and user guides View all Icom IC-A25N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

7 SCAN OPERATION Using the Scan function 1. Push [F], and then push [SCAN] to start a scan. ••"SCANNING" blinks while scanning. LLRotate [DIAL] to change the scanning direction. LLWhen receiving a signal, the scan stops and "RX" is displayed. LLRotate [DIAL] to resume the scan, even if a signal is received. LLWhen a signal is disappeared, the transceiver automatically resumes the scan in 3 seconds. DDMemory channel scan  Normal scan Repeatedly scans tagged memory channels belonging to the same group.* *Scans all memory channels, depending on the presetting. LLYou can tag or untag a memory channel on the "TAG Set" screen. ([MENU] > Manage Memory > Edit Memory > (Select a group) > (Select a channel) > TAG Set) (p. 8-6) Mch 1 Mch 2 Mch 3 Untagged channel Mch 200 2. Push [CLR] to cancel the scan. Scan types The transceiver have any one type of scan function as shown below, depending on the presettings. Ask your dealer for details. DDVFO scan Repeatedly scans all frequencies over the entire band.  IC-A25N/IC-A25NE The transceiver scans the COM and NAV bands. LLMay not scans the NAV band, depending on the presettings. Ask your dealer for details. 108.000 MHz 118.000 MHz NAV band 136.9917 MHz COM band Scan Jump  Priority scan While scanning, Priority watch checks for a signal on the selected Priority channel. LLYou can select a priority channel on the "Priority CH" screen. ([MENU] > Radio Settings > Priority CH) (p. 9-2) Priority channel Mch 1 Mch 2 Mch 3 Mch 200 Untagged channel  IC-A25C/IC-A25CE The transceiver scans only the COM band. 108.000 MHz 118.000 MHz 136.9917 MHz Scan Jump 7-2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
D
Memory channel scan
Normal scan
Repeatedly scans tagged memory channels belonging
to the same group.*
*Scans all memory channels, depending on the presetting.
L
You can tag or untag a memory channel on the “TAG Set”
screen.
([MENU] > Manage Memory > Edit Memory >
(Select a group) > (Select a channel) >
TAG Set
)
(p. 8-6)
Priority scan
While scanning, Priority watch checks for a signal on
the selected Priority channel.
L
You can select a priority channel on the “Priority CH”
screen.
([MENU] > Radio Settings >
Priority CH
) (p. 9-2)
The transceiver have any one type of scan function as
shown below, depending on the presettings.
Ask your dealer for details.
D
VFO scan
Repeatedly scans all frequencies over the entire band.
IC-A25N/IC-A25NE
The transceiver scans the COM and NAV bands.
L
May not scans the NAV band, depending on the
presettings. Ask your dealer for details.
IC-A25C/IC-A25CE
The transceiver scans only the COM band.
7
SCAN OPERATION
7-2
Scan types
Mch 1
Mch 2
Mch 3
Mch 200
Untagged
channel
Priority
channel
Mch 1
Mch 2
Mch 3
Mch 200
Untagged
channel
118.000
MHz
Jump
136.9917 MHz
108.000
MHz
Scan
NAV band
COM band
Using the Scan function
1.
Push [F], and then push [SCAN] to start a scan.
• “SCANNING” blinks while scanning.
L
Rotate [DIAL] to change the scanning direction.
L
When receiving a signal, the scan stops and “RX” is
displayed.
L
Rotate [DIAL] to resume the scan, even if a signal is
received.
L
When a signal is disappeared, the transceiver
automatically resumes the scan in 3 seconds.
2.
Push [CLR] to cancel the scan.
Scan
Jump
118.000
MHz
108.000
MHz
136.9917 MHz