Icom IC-F3003 Instructions - Page 2

PANEL DESCRIPTION ANTENNA CONNECTOR [PTT] [Upper]* [Lower]* ROTARY SELECTOR [VOL] STATUS INDICATOR SPEAKER SPEAKERMICROPHONE JACK MICROPHONE * Dealer assignable DDAbout the Status indicator Lights red* while transmitting. * When the optional battery case is attached, the Status indicator lights orange. Lights green while receiving a signal, or when the squelch is open. Lights or blinks orange when a matching 2-Tone or 5-Tone code is received, depending on the presetting. DDAbout the speaker-microphone jack Connect the optional speaker-microphone or VOX adapter cable. Jack cover NOTE: Attach the jack cover when optional equipment is not used. DDAbout the assignable key functions Your dealers can assign some functions to [Upper] and [Lower]. Ask your dealer for preset function details. BATTERY CHARGING NOTE: Before detaching or attaching a battery pack, BE SURE to turn OFF the transceiver by rotating [VOL] fully counter clockwise, until it makes a "click" sound. Otherwise, a transceiver malfunction could occur. DDRapid charging with the BC-191 You can rapidly charge the BP-264 Ni-MH battery pack with the BC-191. Charging time: Approximately 2 hours for the BP-264 Additionally needed item (purchase separately): ••A power adapter (may be supplied with the charger, depending on the charger version). Power adapter* Battery pack Battery pack + Transceiver Turn OFF The optional OPC-515L (for a DC power source) or the CP-23L (for a 12 V cigarette lighter socket) can be used instead of the power adapter. Screws Charging indicator Lights orange: Charging Lights green: Charged * A different type, or no power adapter is supplied, depending on the charger version. CAUTION: NEVER connect the OPC-515L to a power source using reverse polarity. This will ruin the battery charger. (White line: +, Black line: _) Screws: User supplied self tapping screw (M3.5 × at least 30 mm). Using screws to secure the charger is recommended. DDRegular charging with the BC-192 You can regularly charge the BP-264 Ni-MH battery pack with the BC-192. Charging time: (at 16 V DC is supplied) Approximately 16 hours for the BP-264 Additionally needed item (purchase separately): ••A power adapter (may be supplied with the charger, depending on the charger version). Power adapter* Battery pack Battery pack + Transceiver Turn OFF The optional OPC-515L (for a DC power source) can be used instead of the power adapter. Screws Charging indicator Lights green while charging * A different type, or no power adapter is supplied, depending on the charger version. CAUTION: NEVER connect the OPC-515L to a power source using reverse polarity. This will ruin the battery charger. (White line: +, Black line: _) Screws: User supplied self tapping screw (M3.5 × at least 30 mm). Using screws to secure the charger is recommended. Charge indicator: LLThe charge indicator will not go out even after a battery pack is fully charged. Charging time period differs depending on the input voltage. 12 V: Approximately 36 hours 13.8 V: Approximately 21 hours 16 V: Approximately 16 hours DDRapid charging with the BC-193 You can rapidly charge the BP-265 Li-ion battery pack with the BC-193. Charging time:) Approximately 2.5 hours for the BP-265 Additionally needed item (purchase separately): ••A power adapter (may be supplied with the charger, depending on the charger version). Power adapter* Battery pack Battery pack + Transceiver Turn OFF The optional OPC-515L (for a DC power source) or the CP-23L (for a 12 V cigarette lighter socket) can be used instead of the power adapter. Screws Charging indicator Lights orange: Charging Lights green: Charged * A different type, or no power adapter is supplied, depending on the charger version. CAUTION: NEVER connect the OPC-515L to a power source using reverse polarity. This will ruin the battery charger. (White line: +, Black line: _) Screws: User supplied self tapping screw (M3.5 × at least 30 mm). Using screws to secure the charger is recommended. DDRapid charging with the BC-197 You can rapidly and simultaneously charge up to 6 battery packs with the optional BC-197. Charging time: With AD-120: Approximately 2 hours for the BP-264 With AD-121: Approximately 2.5 hours for the BP-265 Additionally needed item (purchase separately): ••The BC-157S AC ADAPTER or the OPC-656 DC POWER CABLE CAUTION: DO NOT reverse the polarity when connecting the OPC-656 to a power source. This will ruin the battery charger. Red: +, Black: _ Battery pack Battery pack + Transceiver Turn OFF to an AC outlet Power adapter*1 Charger adapter*2 Status indicator*3 OPC-656 Connect to a DC power supply: 12 to 16 V, at least 7 A Red: +, Black: _ *1: Charger adapter's shape may differ, depending on the charger version. *2: A different type, or no power adapter is supplied, depending on the charger version. *3: Each indicator independently functions. There are two types of BC-197 chargers for the transceiver, one is for Ni-MH batteries, and the other is for Li-ion batteries. Before you purchase a BC-197, check the type of battery you are using, and then be sure to choose the suitable charger type. BC-197 with Charger adapters With AD-120* With AD-121* Chargeable Battery BP-264 Ni-MH battery BP-265 Li-ion battery * The charger adapter type, AD-120 or AD-121, is printed on the inside bottom of the charger adapter. The type of battery it holds is printed on the top right corner of the adapter. BASIC OPERATION DDTurning ON the transceiver NOTE: Before using the transceiver for the first time, the battery pack must be fully charged for optimum life and operation. See the BATTERY CHARGING section. zz Rotate [VOL] to turn ON the transceiver. DDReceiving and Transmitting Receiving: 1. Select a channel. LLRotate [ROTARY SELECTOR], or push one of the Memory channel keys, [MR-CH 1] to [MR-CH 4], to select a channel. 2. When receiving a call, rotate [VOL] to adjust the audio output level to a comfortable listening level. Transmitting: CAUTION: Attach an antenna before transmitting. DO NOT transmit without an antenna. 1. Wait until the channel is clear to avoid interference. 2. While holding down [PTT], speak at your normal voice level. 3. Release [PTT] to receive. IMPORTANT: To maximize the readability of your signal: 1. After pushing [PTT], pause briefly before you start speaking. 2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak at your normal voice level. SUPPLIED ACCESSORIES Battery pack Belt clip Battery charger Jack cover (with screws) Power adapter Flexible antenna NOTE: Some accessories are not supplied, or the shape is different, depending on the transceiver version. OPTIONS DDBATTERY PACKS ••BP-263 BATTERY CASE ••BP-264/BP-265 BATTERY PACKS Battery pack Voltage Capacity Approximate battery life* BP-263 BP-264 BP-265 Battery case for AA (LR6) × 6 alkaline - 7.2 V 1400 mAh (minimum) 1420 mAh (typical) VHF 14.1 hours UHF 13.7 hours 7.4 V 1850 mAh (minimum) 2000 mhA (typical) VHF 20.2 hours UHF 19.6 hours * When the power save function is turned ON, and the operating periods are calculated under the following conditions. TX : RX : standby = 5 : 5 : 90 DDCHARGERS ••BC-191 DESKTOP CHARGER For rapid charging of the Ni-MH battery pack. A power adapter may be supplied with the charger, depending on the version. Charging time: Approximately 2 hours for the BP-264. ••BC-192 DESKTOP CHARGER For regular charging of the Ni-MH battery pack. A power adapter may be supplied with the charger, depending on the version. Charging time: Approximately 16 hours for the BP-264. ••BC-193 DESKTOP CHARGER For rapid charging of the Li-ion battery pack. A power adapter may be supplied with the charger, depending on the version. Charging time: Approximately 2.5 hours for the BP-265. ••BC-197 MULTI CHARGER For rapid simultaneous charging of up to 6 battery packs. A power adapter may be supplied with the charger, depending on the version. There are 2 types of the BC197 chargers for the IC-F3000 series and the IC-F4000 series. BC-197 Charger Type with AD-120* with AD-121* Chargeable Battery BP-264 Ni-MH battery BP-265 Li-ion battery Charging time Approximately 2 hours Approximately 2.5 hours * E ither the AD-120 or the AD-121 charger adapters are installed in the BC-197, depending on the chargeable battery pack. DDDC CABLES ••CP-23L CIGARETTE LIGHTER CABLE Use when charging the battery pack from a 12 V cigarette lighter socket. (Use with the BC-191/BC-193) ••OPC-515L DC POWER CABLE Use with a 13.8 V power source instead of the power adapter. (Use with the BC-191/BC-192/BC-193) DDANTENNAS ••FA-SC25V/FA-SC55V VHF ANTENNAS FA-SC25V: 136 ~ 155 MHz FA-SC55V: 146 ~ 174 MHz ••FA-SC56VS/FA-SC57VS VHF STUBBY ANTENNAS FA-SC56VS: 150 ~ 162 MHz FA-SC57VS: 160 ~ 174 MHz ••FA-SC61VC VHF CUT ANTENNA FA-SC61VC: 136 ~ 174 MHz ••FA-SC25U/FA-SC57U/FA-SC72U UHF ANTENNAS FA-SC25U: 400 ~ 430 MHz FA-SC57U: 430 ~ 470 MHz FA-SC72U: 470 ~ 520 MHz ••FA-SC73US UHF STUBBY ANTENNAS FA-SC73US: 450 ~ 490 MHz ••FA-SC61UC UHF CUT ANTENNAS FA-SC61UC: 380 ~ 520 MHz OTHERS ••AD-98FSC ANTENNA CONNECTOR CONVERTER Enables you to connect an external antenna with a BNC connector. ••HM-158L/HM-159L SPEAKER-MICROPHONE Combination speaker-microphone that provides convenient operation while the transceiver is hanging on your belt. ••HS-94/HS-95/HS-97 HEADSET + OPC-2004LA PLUG ADAPTER CABLE HS-94: Ear-hook type HS-95: Neck-arm type HS-97: Throat microphone OPC-2004LA: E nables you to connect the HS-94/HS-95/ HS-97 to the transceiver. After connecting, you can use the VOX function Some options may not be available in some countries. Ask your dealer for details.