Icom IC-F4210D Operation Guide - Page 27
Transmitting an Emergency Call, For your reference-Power OFF Emergency function
View all Icom IC-F4210D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
IDAS OPERATION 2 DDTransmitting an Emergency Call When [Emergency] is held down for a specified time period, 1 IMPORTANT: It is recommended an emergency channel be 2 a digital command emergency signal is transmitted once or repeatedly* on the emergency channel. When no emergency channel is specified, the signal is transmitted on the operat- separately set to provide reliable emergency call operation. 3 NOTE: 4 ing channel. * When the Repeat Cancel function is ON, the transceiver cancels repeating after receiving an acknowledgement. When the Repeat Cancel function is OFF, the transceiver repeats calling according to the number of repeat cycles, even after receiving an acknowledge- If the Digital Request Ack function is activated, the trans- 5 ceiver transmits an emergency call with a request to send back an acknowledgment. 6 7 ment. ✓✓ For your reference-Power OFF Emergency function 8 Individual or Talkgroup call types of emergency calls can be When the [Power OFF Emergency] key is assigned, the 9 preset. If the call type is not preset, the default or selected call type is used. transceiver can transmit an Emergency call, even though it appears to be OFF. 10 11 If you want to cancel the emergency call, hold down the key again before transmitting the call. While holding down [Power OFF Emergency], push [ ] to turn OFF the power to activate the Power OFF Emergency 12 The emergency call can be transmitted without a beep sound- function. 13 ing, and the LCD lighting, depending on the presetting. (Silent The transceiver enters the emergency mode, and starts operation) counting down to transmit the Emergency call, even though it 14 The transceiver can also be programmed to keep the micro- appears to be OFF. 15 phone open during an emergency call, which allows monitoring of the situation. Ask your dealer for details. When the function is activated, any key operation, hanger action, Lone Worker function, LED and speaker are disabled. However, the transceiver transmits Emergency calls accord- 16 ing to the emergency settings. To cancel the function and restore the transceiver, turn ON the transceiver's power. 25