Icom IC-F6021 Instruction Manual - Page 16
■ Stun function, ■ Priority A channel selection
View all Icom IC-F6021 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2 BASIC OPERATION ■ Stun function When the specified ID, set as a stun ID or kill ID, is received, the stun function is activated. When the stun ID is received, the transceiver becomes unusable. Entering of the password (p. 7) or receiving a specified ID, set as a revive ID, is necessary to operate the transceiver again in this case. When the kill ID is received, the transceiver switches to the cloning required condition. Cloning the transceiver is necessary to operate the transceiver again in this case. Stun function can be also used with the MDC 1200 signaling system. (p. 13) ■ Priority A channel selection When one of the following operations is performed, the transceiver selects the Priority A channel automatically. • Turning ON the transceiver The Priority A channel is selected each time the transceiver is turned ON. • Off hook. The Priority A channel is selected when the microphone is taken off its hanger. 12