Icom IC-F6121D Instruction Manual - Page 9

PANEL DESCRIPTION 1 1 TONE/RAN CH SELECT KEY WIDE/NARROW KEY ➥ W hile in analog mode, push to enter the continuous tone Push to toggle the IF bandwidth between wide and narrow. channel selection mode. Then push [CH Up] or [CH Down] • The wide passband width can be selected from 25.0 or 20.0 kHz to select a desired tone frequency/code setting. After the using the CS-F3100D/F5120D cloning software. (PMR operation selection, push this key again to set it. only) Ask your dealer for details. ➥ While in digital mode, push to enter the RAN channel selection mode. Then push [CH Up] or [CH Down] to select a desired RAN code. After the selection, push this key again to set it. ➥ W hile in mixed (digital and analog) mode, push to enter the continuous tone channel selection mode. Then push [CH Up] or [CH Down] to select a desired tone frequency/ DTMF AUTODIAL KEY ➥ P ush to enter the DTMF channel selection mode, then push [CH Up] or [CH Down] to select the desired DTMF channel. ➥ After selecting the DTMF channel, push again to transmit the selected DTMF code. code setting. After setting, push this key to set it. After that, the RAN channel selection mode appears. Select a desired RAN code with [CH Up] or [CH Down]. After the selection, push this key again to set it. RE-DIAL KEY Push to transmit the last-transmitted DTMF code. • TX memories are cleared after turning OFF the transceiver. TALK AROUND KEY Push to turn the Talk Around function ON or OFF. • The Talk Around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver communication. EMERGENCY KEY Hold down for a specified period to transmit an emergency call. • If you want to cancel the emergency call, hold down the key again, before transmitting it. 5