Icom IC-F6121D Operating Guide - Page 16

3 IDAS OPERATION ■ Transmitting a call (continued) D Transmitting a Message The transceiver has the ability to send a preprogrammed message. There are 10 messages that can be sent. q P ush [Digital Button] to enter the application selection mode. • "VOICE" appears. • To change to the desired call type, hold down [Digital Button] for 1 second while in standby. After changing, the transceiver automatically enters the application selection mode. w P ush [CH Up] or [CH Down] to select "MSG." e Push [Digital Button] again to enter the message selection mode. • The preprogrammed message is displayed. r P ush [CH Up] or [CH Down] to select the desired message. Preprogrammed message is displayed. t P ush [Digital Button] again to enter the Individual or Talkgroup ID selection mode. • The preprogrammed ID name is displayed. • When an ID name is not programmed, the ID code is displayed. • The primarily ID can be preset to display first. y P ush [CH Up] or [CH Down] to select the desired ID name (or ID code). Individual or Talkgroup ID name is displayed. u P ush [PTT] to transmit the message. • "MSG TX" is displayed. i Release [PTT]. • "MSG OK" is displayed after receiving an acknowledgement from a base station. • "MSG FAIL" is displayed if there is no acknowledgment from the base station. o A fter a specified time period has passed, the transceiver will return to standby. 13