Icom IC-F6123D Operating Guide - Page 13
■ Transmitting a call
View all Icom IC-F6123D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
IDAS OPERATION 3 ■ Transmitting a call 1 IDAS operation allows you to make a call to a specific station w P ush [Digital Button] again to enter the Individual or Talk- 2 (Individual call) or to a specific group (Talkgroup call). Other group ID selection mode. 3 digital mode transceivers on the channel will not hear a call that does not match their Individual or Talkgroup ID and/or RAN (Radio Access Number) code. • The preprogrammed ID name is displayed. • When an ID name is not programmed, ID code is displayed. 4 • The primary ID can be preset to display first. • When you want to make a voice call to all transceivers within 5 D Transmitting a Voice Call the communication range, use the 'All Call' function; select the 6 Talkgroup ID code "65535." q P ush [Digital Button] to enter the application selection e Push [CH Up] or [CH Down] to select a desired an ID name 7 mode. • "VOICE" appears. or ID code. 8 • To change to the desired call type, hold down [Digital Button] for 1 second while in standby. After changing, the transceiver auto- 9 matically enters the application selection mode. 10 11 * This illustration shows an Individual type call. Individual or Talkgroup 12 ID name is displayed. 13 r H old down [PTT], then speak into the microphone. 14 t Release [PTT] to receive. 15 16 10