Icom IC-M424G Instruction Manual - Page 73
Channel 16 Switch function, function to Auto No Delay, 10 Second Delay, or OFF
View all Icom IC-M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
DSC OPERATION 7 DD Channel 16 Switch function By regulation, after receiving a Distress call, the transceiver changes the operating channel to Channel 16. However, when this setting is set to "OFF," the function enables the transceiver to remain on the operating channel, even after receiving a Distress call. qqEnter "CH 16 SWITCH" in the DSC Settings menu. MENU ➪ DSC Settings ➪ CH 16 Switch (Push [MENU].) (Rotate Dial, then push [ENT].) wwRotate Dial or push [Y]/[Z] to set the Channel 16 Switch function to "Auto (No Delay)," "10 Second Delay," or "OFF," then push [ENT]. • Push [BACK] to return to the previous screen. (default) 1 2 Auto (No Delay): After receiving a Distress call, and 3 [ACPT] is pushed on the confirmation screen, the transceiver immediately 4 changes to Channel 16. 5 10 Second Delay: After receiving a Distress call, and [ACPT] is pushed on the confirmation 6 screen, the transceiver remains on the 7 current operating channel for 10 sec- onds. After that, the transceiver auto- 8 matically changes to Channel 16. 9 (default) OFF: Even after receiving a Distress call, the 10 transceiver remains on the operating 11 channel. • " " is displayed. 12 eePush [EXIT] to return to the normal operating mode. 13 14 15 16 63