Icom ID-5100A Operating Guide - Page 2

TOUCH SCREEN OPERATIONS ■■About the Touch area Areas you can touch for various operations are shown with a " " border. • This page describes the main operations of the touch screen. See the instruction manual for other operations. ■■Touch operation (Short touch): If the display is touched briefly, one short beep sounds. (Long touch): If the display is touched for 1 second, one short and one long beep sound. • After the beep, the operation is enabled. Dual or Single band display selection: You can use the SUB band for only RX. (TX cannot be made in the SUB band.) "MHz" tuning selection: Operating band selection: Operating mode selection: Cancels "MHz" tuning: Tuning step selection: Sets MAIN band to the right side: Dual or Single band display selection: • In the Single band, touch [B] to set the B band as the MAIN band. ID-5100 Sets MAIN band to the right side: • Touch operation on the SUB band is enabled when "Touch Operation (Sub)" is set to "Function Select" in the Menu screen. TX power selection: Function group selection: Displays the Function menu list: In the DR screen (Operating Mode: DV) Function menu operations • The following operations are examples. Displays the Memory Write window: Writes to a blank CH: Scan type selection: Starts a scan: Displays the QUICK Menu: Mutes the audio: In the VFO mode (Operating Mode: DV) Displays the Menu screen: Home CH selection: • Selects the Home CH that you set in the Home CH setting window. Home CH setting: Displays the DR screen: • D-STAR settings can easily be made.