Icom IP110H Instruction Manual - Page 2

2. INSTALLING THE IP100FS These Instructions are based on using Windows 7. 1 • Make sure Windows has completed its and no other applications are running. start-up, 6 Click [Next >]. • Make sure you are logged in as the administrator. 2 Insert the USB flash drive into the USB port. To the [USB] Port USB flash drive The location of the [USB] port may differ, depending on your PC. Refer to the PC's instruction manual on the USB port for details. If you want to install the software in a different location, click [Change...] then select a desired location on the displayed screen. Click 3 Double-click "IP100FS_Setup.exe" in the REMOVABLE drive. 7 Click [Install]. Double-click 4 If the "User Account Control" window appears, click [Yes] to continue. 5 Click [Next >]. 8 Click [Finish]. Click Click NOTE: If your PC has already installed the software, the uninstallation or update screen appears. Click 3. STARTING THE IP100FS NOTE: Before starting the IP100FS, connect the speaker, headset or microphone that you are going to use. 1 Click the IP100FS icon in the Start menu. • You can also start the software by simply doubleclicking the IP100FS icon on your desktop. • If the "User Account Control" window appears, click [Yes] to continue. 4 Set the sites, destinations and so on on the displayed software screen. • Refer to the IP100FS Help file for more details on the settings. 2 Click "Option" on the Menu Bar, and then click "Setting...." 3 The IP100FS login window appears. • T he user ID and password listed below are set as default. NOTE on the USB flash drive: • The USB flash drive must be inserted into the USB port when installing and starting the IP100FS. • Remove the USB flash drive from the USB port before restarting or shutting down the PC, otherwise you may lose your data, or damage the device. • Remove the USB flash drive from the USB port after completing the site settings. To log in as the administrator enter: User ID admin Password admin FURTHER INFORMATION DDRemoving the USB flash drive qqClick the icon in the task tray, and then click , as shown below. • Refer to your PC's instruction manual if the icon does not appear in your task tray. wwRemove the USB flash drive when the message is displayed. DDUninstalling the IP100FS Follow the instructions below to uninstall the IP100FS. • Make sure you are logged in as the administrator. qqClick the button and then click . wwClick . eeRight-click , and then click . rrClick [Yes] in the uninstallation confirmation dialog. ttIf the "User Account Control" dialog appears, click [Yes] to uninstall. DDReinstalling the IP100FS Once the uninstalling is complete as described above, you can reinstall the IP100FS by following the steps in "2 INSTALLING THE IP100FS." Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, and/or other countries. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-7119W-1EX-q Printed in Japan © 2014-2015 Icom Inc.