Icom M506 Instruction Manual - Page 80
Channel 70 Squelch level, DSC Loop Test, Enter CH 70 SQL Level
View all Icom M506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
7 DSC OPERATION D Channel 70 Squelch level Set the squelch level on Channel 70. The transceiver has 11 squelch levels between 1 (loose squelch) and 10 (tight squelch) and OPEN. OPEN is completely open. q E nter "CH 70 SQL Level" in the DSC Settings menu. MENU ➪ DSC SET ➪ CH 70 SQL Level (Push [MENU]) (Select icon) (Rotate dial, then push [ENT].) w R otate dial to adjust the squelch level until the noise just disappears, then push [ENT]. • Push [BACK] to cancel and return to the DSC Settings menu. D DSC Loop Test The DSC loop test function sends transmit DSC signals to the receive AF circuit to compare and check the TX and RX signals at the AF level. q E nter "DSC LOOP TEST" in the DSC Settings menu. MENU DSC SET ➪ DSC Loop Test (Push [MENU]) (Select icon) (Rotate dial, then push [ENT].) w P ush [ENT] to start the DSC loop test. • Push [BACK] to cancel and return to the DSC Settings menu. (default) eePush [EXIT] to return to the normal operating mode. • W hen the transmit DSC and receive DSC signals are matched, "OK" appears. eePush [EXIT] to return to the normal operating mode. If "NG" appears in step w, either or both TX and RX DSC circuits has a problem. In that case, you will have to send the transceiver to your nearest dealer for repair. 71