Icom M88 Instruction Manual - Page 26
DLCD contrast selection DAuto power save function DSelf check function
View all Icom M88 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
8 SET MODE D LCD contrast selection "LC" The contrast of the LCD can be adjusted from 4 levels. • 1 (bright) - 4 (dark); 3 (default) PUSH LCD contrast 3 (default) LCD contrast 1 D Auto power save function "PS" The auto power save function reduces current drain by deactivating the receiver circuit for preset intervals. PUSH Auto power save ON (default) Auto power save OFF D Self check function "SC" The self check function checks transceiver conditions by itself, and informs you in case a problem is found. The following items are checked after the power is turned ON, then it switches to operation mode. • Temperature : Outside of -35°C to +73°C; -31°F to +163°F (approx.) • Connected battery voltage • Water intrusion PUSH Self check OFF (default) Self check ON When error messages as shown below are displayed, see trouble shooting for advice (p. 28). Temperature error Battery voltage error Water intrusion error 20