Icom M92D Instruction Manual - Page 35
Transmitting DSC calls
View all Icom M92D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
New2001 DSC OPERATION 8 ■ Transmitting DSC calls To ensure correct operation of the DSC function, make sure you correctly set the CH70 SQL LEVEL. (p. 68) D Transmitting an individual call The Individual call function allows you to transmit a DSC signal to only a specific station. q Enter "INDIVIDUAL CALL" in the DSC CALLS menu. ❮MENU❯ ➪ ❮DSC Calls❯ ➪ ❮Individual Call❯ (Push [MENU]) (Push [Y]/[Z], then push [ENTER].) w Select the desired preprogrammed individual address, or "Manual Input," using [Y]/[Z], then push [ENTER]. • The ID code for the Individual call can be set first. (p. 20) • When "Manual Input" is selected, set a desired 9 digit MMSI ID code for the individual you wish to call. About Manual Inputting: 1 Enter a desired individual ID in the following way: • Select a desired number using [Y]/[Z 2 • Push [ENTER] to set it. • To move the cursor, select either arrow, "←" or "→," then push 3 [ENTER]. 4 • The first digit is specified as '0' for a Group ID. If a Group ID is entered, an error beep sounds after pushing [FINISH]. 5 • The first two digits are '0' for any coast station ID. 6 7 8 9 10 e Select Routine, Safety or Urgency as the desired call type 11 using [Y]/[Z], then push [ENTER]. 12 13 14 15 16 NOTE: When a coast station is selected in step w, the voice channel is automatically specified by the coast station. Therefore, skip step r and go directly to step t. 28