Image Fitness 10.2qi/10.2ql English Manual - Page 11

11

HOW TO USE THE MANUAL MODE

Insert the key fully into the console.

See GETTING STARTED on page 10.

Select the manual mode.

When the key is in-

serted, the manual

mode will be selected

and the Manual indica-

tor will light. If a program

has been selected,

press the Select Pro-

gram button repeatedly to select the manual mode.

Press the Start button or the Speed + button to

start the walking belt.

A moment after the button is pressed, the walking

belt will begin to move at 1 mph. Hold the handrails

and begin walking. As you exercise, change the

speed of the walking

belt as desired by

pressing the Speed +

and – buttons. Each

time a button is

pressed, the speed set-

ting will change by 0.1

mph; if a button is held down, the speed setting

will change in increments of 0.5 mph. To change

the speed setting quickly, press the 1-step Speed

buttons. The speed range is 0.5 mph to 10 mph.

Note: After the buttons are pressed, it may take a

moment for the treadmill to reach the selected

speed setting.

During the first few minutes that you use the tread-

mill, inspect the alignment of the walking belt, and

align the walking belt if necessary (see page 24).

To stop the walking belt, press the Stop button.

The Time/Laps display will begin to flash. To

restart the walking belt, press the Start button or

the Speed + button.

Change the incline of the treadmill as desired.

To change the incline of

the treadmill, press the

Incline buttons. Each

time a button is

pressed, the incline will

change by 0.5%. The

incline range is 0% to 10%. Note: After the buttons

are pressed, it may take a moment for the treadmill

to reach the selected incline setting.

Follow your progress with the LED track and

the displays.

The LED track

—When

the manual mode or the

iFIT.com mode is se-

lected, the program dis-

play will show an LED

track representing 1/4

mile. As you exercise, the indicators around the

track will light in sequence until you have walked or

run 1/4 mile. A new lap will then begin.

The Training Zone dis-

play

—As you exercise,

the Training Zone dis-

play will show the ap-

proximate intensity level

of your exercise. For ex-

ample, if three or four indicators in the display are

lit, your intensity level is ideal for fat burning.

Time/Laps display

—

When the manual mode

or the iFIT.com mode is

selected, this display will

show the elapsed time

and the number of 1/4-

mile laps you have completed. When a preset pro-

gram or a custom program is selected, the display

will show the time remaining in the program, the

time remaining in the current segment of the pro-

gram, and the number of 1/4-mile laps you have

completed. The display will change from one num-

ber to the next every few seconds, as shown by

the indicators around the display.

Distance/Incline dis-

play

—This display

shows the distance that

you have walked and

the incline level of the

treadmill. The display will

change from one number to the other every few

seconds, as shown by the indicators around the

display.

Heart Rate/Calories

display

—When you are

not using the handgrip

pulse sensor, this

display will show the

approximate number of

calories you have burned. When the are using the

handgrip pulse sensor or the optional chest pulse

sensor (see page 21), the display will also show

your heart rate (see step 6 on page 12).

5

4

3

2

1

Manual Indicator

Image Fitness 10.2qi/10.2ql English Manual - Page 11

How To Use The Manual Mode

Page 11 highlights