Image Fitness 4.0 English Manual - Page 7
Attach a Rear Upright 15 to the Left Base 2
View all Image Fitness 4.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
6. Attach a Rear Upright (15) to the Left Base (2) and the indicated Upper Support Plates (3) with four 6 11 3 3/8Ó x 3 1/2Ó Bolts (6) and four 3/8Ó Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. Attach the other Rear Upright (15) to the Right Base (7 [not shown]) and the other Upper Support 6 Plates (3) in the same manner. Tighten all nylon locknuts used in steps 1 through 6. 15 11 7. Have another person hold the Crossbar (18) between the lower holes in the Rear Uprights (15), 7 in the indicated position. Make sure that the Crossbar is turned exactly as shown. Press a 2Ó Round Inner Cap (10) into a Weight Storage Tube (14). Attach the Weight Storage Tube and one end of the Crossbar (18) to one of the Rear Uprights (15) using two 3/8Ó x 3 1/2Ó Bolts (6) and two 3/8Ó Nylon Locknuts (11). Attach another Weight Storage Tube (14) and the other end of the Crossbar (18) to the other Rear Upright (15) in the same way. 8. Press a 2Ó Round Inner Cap (10) into a Weight 8 Storage Tube (14). Attach the Weight Storage Tube to one of the Rear Uprights (15) using two 3/8Ó x 3 1/2Ó Bolts (6), a Small Support Plate (16), and two 3/8Ó Nylon Locknuts (11). Attach the remaining Weight Storage Tube (14) to the other Rear Upright (15) in the same way. 2 6 18 15 15 14 11 6 10 11 16 15 14 6 10 9. Make sure all parts are properly tightened before you use the weight rack. 7