InSinkErator Model Hot1 Specifications - Page 1
InSinkErator Model Hot1 Manual
View all InSinkErator Model Hot1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
in sink erator The Next Necessity Dimensions Minimum 3-3/4" required from sink hole center to backsplash 3-9/16.. 5-1/2" 6" 1 Instant Hot Water Dispensers Model Hot1 One-piece construction for easy installation Submittal Sheet • Hot Only -1/3-gallon tank delivers 40 cups of near-boiling 190°F water per hour • 1-Year We Come To You® In-Home Service Warranty* • 115 volts, 500 watts, 4.3 amps • Available in polished stainless steel with black handle Sample Specification Instant hot water dispenser(s) shall be InSinkErator Model Hotl with adjustable temperature from 160°F to 200°F and instant, self-closing hot valve. Warranty: 1-year parts and in-home service. • The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. Specifications Capacity 1/3-gallon copper tank dispenses 40 cups of 190°F water per hour Electrical 115 volts A.C., 500 watts, 4.3 amp heating element with grounded three (3) prong plug Thermostat Snap-action, adjustable from 160°F to 200°F (factory pre-set at 190°F) Valve Instant, self-closing Recommended 30-125 psi Supply Pressure Shipping Weight Approximately 4 lbs. Required 1-1/4" -1-1/2" Hole Diameter standard sink hole 11-3/8" 2-9/16A NOTE: Max counter thickness is 2". Job Specifications HWD386-11A-45-10 • Complies with California Lead Plumbing Law 1-800-558-5700 www.insinkeratoccom Printed in USA 4 EMERSON. Appliance Solutions The Emerson logo is a trademark and service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right of change or discontinue models. tEl 201InSinkErator, a division of Emerson Electric Co. All Rights Reserved.