Insignia IS-PA04072 User Manual (English) - Page 14

Troubleshooting

Page 14 highlights

Insignia NS-B2110 CD Boombox with AM/FM Radio To cancel a play list: • Slide the Function switch to RADIO or OFF. Or • Press the Stop button twice. Or • Open the CD door. Troubleshooting Problem Possible cause Possible solution No sound. Your boombox does not have power. Make sure that the power cord is plugged into a power outlet or replace the batteries. Playback has not been started. Press the Play/ Pause button. The Function switch Make sure the is not in the correct Function switch is in position. the correct position. The VOLUME control is set to minimum. Increase the volume. A CD is inserted, but The CD is inserted tracks are not upside down. displayed. Make sure that the CD is inserted with the label side up. The CD is dirty. Clean the CD. For more information, see "Cleaning CDs" on page 15. The CD is scratched Use a different CD. or warped. Moisture has formed Remove the CD and inside the CD deck. leave the CD door open for about an hour to dry. Certain sections of a The CD is dirty. CD do not played normally. Clean the CD. For more information, see "Cleaning CDs" on page 15. The CD is scratched. Skip over the scratched sections, or replace the CD. 14 www.insignia-products.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

14
Insignia NS-B2110 CD Boombox with AM/FM Radio
www.insignia-products.com
To cancel a play list:
Slide the Function switch to
RADIO
or
OFF
.
Or
Press the Stop
button twice.
Or
Open the CD door.
Troubleshooting
Problem
Possible cause
Possible solution
No sound.
Your boombox does
not have power.
Make sure that the
power cord is
plugged into a power
outlet or replace the
batteries.
Playback has not
been started.
Press the Play/
Pause button.
The Function switch
is not in the correct
position.
Make sure the
Function switch is in
the correct position.
The
VOLUME
control is set to
minimum.
Increase the volume.
A CD is inserted, but
tracks are not
displayed.
The CD is inserted
upside down.
Make sure that the
CD is inserted with
the label side up.
The CD is dirty.
Clean the CD. For
more information,
see “Cleaning CDs”
on page 15.
The CD is scratched
or warped.
Use a different CD.
Moisture has formed
inside the CD deck.
Remove the CD and
leave the CD door
open for about an
hour to dry.
Certain sections of a
CD do not played
normally.
The CD is dirty.
Clean the CD. For
more information,
see “Cleaning CDs”
on page 15.
The CD is scratched.
Skip over the
scratched sections,
or replace the CD.