Insignia NS-15AT10 Quick Setup Guide (English) - Page 1

In the box • USB power adapter • Micro USB cable • Quick Setup Guide • Important Information Features Front camera Ambient light sensor FIND YOUR USER GUIDE ONLINE! We are going green so a copy of your User Guide is not provided in the box but is available online. To find your manual, touch the ? icon on your tablet or go to www.insigniaproducts.com on your computer, then click Support & Service. Enter your model number in the box under Manual, Firmware, Drivers & Product Information, then click ►. Power on/off button Rear camera Volume up/down button Micro HDMI jack Earphone jack Micro USB port Reset hole Microphone microSD™ card slot 1 Charging the battery Note: Charge your tablet fully (six hours) before using it the first time. 1 Connect the micro USB cable to your tablet. 2 Connect the other end of the micro USB cable to the USB power adapter (wall charger), then plug the adapter into a power outlet. It takes about six hours to fully charge your tablet. Caution: Use only the included power adapter or a qualified 5V/2A power adapter to charge your tablet's battery. An incompatible adapter may damage your tablet. Before using your new product, please read these instructions to prevent any damage. Speakers Quick Setup Guide I NS-15AT10 10.1" Wi-Fi Android Tablet 2 Turning on your tablet • Press and hold the (power) button on the side of your tablet. 3 Setting up your tablet When you turn on your tablet for the first time, you'll be prompted to set up things like Wi-Fi and email. Follow the instructions displayed on your tablet to complete setup. Connecting to a Wi-Fi access point To use the Wi-Fi feature, you need access to a wireless access point or hotspot. 1 From the home screen, touch the (applications) icon, then Settings. 2 Touch Wi-Fi. 3 Touch OFF to turn Wi-Fi on. Your tablet automatically scans for available networks. 4 Touch a Wi-Fi network. a) If the network is open, your tablet connects automatically. b) If the network is secured, enter a password. Touch Done, then Connect. A connection icon appears in the status bar when your tablet is connected.