Insignia NS-1UCDVD User Manual (English) - Page 12

Selecting display options The Display menu allows you to select an aspect for your TV and the mode. To set up a password: 1 On the Setup menu, select DISPLAY. Press the ENTER button to confirm your selection. 2 Press the or button to access TV Aspect. Press the ENTER button to confirm your selection. Choose one of the following options and press the ENTER button to confirm your selection. • 4:3 - Select when a standard 4:3 TV is connected to the DVD player. • 16:9 - Select when a 16:9 wide TV is connected to the DVD player. To select display mode: 1 On the Setup menu, select DISPLAY. Press the ENTER button to confirm your selection. 2 Press the or button to access Display Mode. Press the ENTER button to confirm your selection. The display mode setting only works when the TV aspect is set to 4:3. 3 Choose one of the following options and press the ENTER button to confirm your selection. • Letterbox - Select to display a wide picture with bands on the upper and lower portions of the screen. • Panscan - Select to display the wide picture on the entire screen. Portions that do not fit on the screen will be cut off. Selecting audio options Each DVD disc has a number of audio input options. Set the DVD player's audio options according to the type of audio system that you use. Insignia NS-1UCDVD DVD Player 2 Press the or button to access the desired audio option. Press the ENTER button to confirm your selection. Set the option according to the following table and press the ENTER button to confirm your selection. Menu Item Dolby Digital DTS MPEG Sample Frequency DRC (Dynamic Range Control) Vocal Information Displayed • Bitstream - Select if you connected this player's DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. • PCM - Select for Dolby Digital or MPEG when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital, MPEG will be automatically downmixed to two-channel PCM audio. • Bitstream - Select if you connected this player's DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. • Off - Select if the DTS signal is not output through this player's DIGITAL OUT jack. • Bitstream - Select if you connected this player's DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. • PCM - Select for Dolby Digital or MPEG when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital, MPEG will be automatically downmixed to two-channel PCM audio • 48 kHz. - Select If your receiver or amplifier is NOT capable of handling 96 kHz signals. When this option is selected, the player automatically converts any 96 kHz signals to 48 kHz so your system can decode them. • 96 kHz. - Select if your receiver or amplifier is capable of handling 96 kHz signals. Check your amplifier documentation to verify its capabilities. • ON - Select to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. • OFF - Select to hear audio in the most realistic and accurate presentation. • ON - Select when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound. • OFF - Select when playing any other type of audio. To set audio: 1 On the Setup menu, select AUDIO. Press the ENTER button to confirm your selection. 12 www.insignia-products.com