Insignia NS-32L120A13 User Manual (English) - Page 19

Insignia 32"/46" LCD TV Connecting an antenna or cable TV (no box) To connect an antenna or cable TV (no box): 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect a coaxial cable to the ANT/CABLE IN jack on the side of your TV and to the antenna or cable TV wall jack. NS-32L120A13/NS-32L240A13 Side of TV USB Antenna or cable TV (no box) COMPONENT IN R PR AUDIO PB L AV IN Y IN DIGITAL VIDEO OUTPUT (COAXIAL) HDMI 2 (ARC) HDMI 1 (DVI) Coaxial cable ANT/ CABLE IN NS-46L240A13 Antenna or cable TV (no box) Coaxial cable USB COMPON ENT IN R PR AUDIO PB L AV IN Y IN DIGITAL VIDEO OUTPUT (COAXIAL) HDMI 3 Side of TV HDMI 2 (ARC) HDMI 1 (DVI) ANT/ CABLE IN 3 Plug your TV's power cord into a power outlet, then turn on your TV. 4 Go through the Setup Wizard on page 26. Notes • • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. If the antenna is not installed correctly, contact qualified service personnel to correct the problem. If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier. If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box. Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD. www.insigniaproducts.com 15