Insignia NS-43D420NA20 Quick Setup Guide - Page 1

QUICK SETUP GUIDE 43" FHD 60Hz LED TV NS-43D420NA20 ACCESSORIES Remote control and two AAA batteries ++ ACC AAA AAA ASPECT GAME CC TV stands M4 screws (14 mm length) (4 pcs.) STOP Before using your new product, please read these instructions to prevent any damage. Do not plug your power cord in until all other devices have been connected. Before using your new product, please read these instructions to prevent any damage. USB DVC 5V 0.5.5A 1 INSTALLING THE STANDS OR A WALL MOUNT Place your TV face-down on a cushioned, clean surface. STANDS 1 Align the TV stand screw holes with the holes on your TV's bottom. 2 Use a Phillips screwdriver and two provided screws to secure each stand to your TV. FEATURES Power indicator Remote control sensor DIGITAL OPTICAL OUTPUT L - AUDIO - R AV IN R VESA Mounting Pattern 200 x 200 mm Screws: type M6, 10 mm minimum length depending on the wall-mount. L WALL MOUNT Before you mount your TV, make sure that: • You remove the stands. • The wall-mount bracket supports the weight of your TV. See the instructions that came with your wall mount for more information about how to correctly mount your TV. WARNING: Your TV has four VESA mounting holes on the back. You must secure a wall-mount bracket to all four holes. If you do not use all four holes, your TV may fall and cause property damage or personal injury. Note: Wall-mount screws are not included. 2 MAKING CONNECTIONS HDMI (best video quality) AUDIO OUT DIGITAL OPTICAL OUTPUT HDMI1 (ARC) Note: You can use the HDMI 1 (ARC) jack to connect a digital audio system. AV (good video quality) AUDIO/VIDEO OUT HDMI3 HDMI2 HDMI OPTIONS VIDEO ACC CC ASPECT GAME HDMI2 HDMI1(ARC) AUDIO OUT HDMI3 ANT/CABLE Note: Images do not necessarily represent the exact design of your television. USING ANALOG AUDIO L R AUDIO IN SOUNDBAR AUDIO OPTIONS USING DIGITAL AUDIO OPTICAL AUDIO IN You can use the DIGITAL OPTICAL OUTPUT jack or the HDMI 1 (ARC) jack. Note: If you need to change the digital audio format, go to the Home SOUNDBAR menu, select Settings, then select Display & Sounds. Select Audio Output, then select Digital Audio Format and change the setting to PCM or Dolby Digital. VIDEO L - AUDIO - R AV IN ANT/CABLE Coaxial (good video quality) Connect an antenna to access live over-the-air TV. HD