Insignia NS-46E481A13 Important Information (English) - Page 5
Specifications - settings
View all Insignia NS-46E481A13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
General Problem Solution No power "No signal" error message is displayed After Auto Channel Search, there are no channels One or more channels do not display Password is lost Some settings cannot be accessed TV cabinet creaks Control buttons do not work TV keeps turning off • Make sure that the power cord is correctly connected to your TV and a power outlet. • Unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV. • Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference. • Press INPUT and make sure that you have selected the correct input for the device or service you are trying to use. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure that you have the correct input selected to view channels from the cable or satellite box. • Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. • Make sure that the antenna or cable/satellite TV is connected securely to your TV. • Try replacing the cable between the antenna/cable or cable/satellite box and your TV. • Make sure that the channels are not blocked. See "Setting parental control levels" in the online User Guide. • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" in the online User Guide. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure that you have the correct input selected to view channels from the cable or satellite box. • If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" in the online User Guide. • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" in the online User Guide. • If a setting is grayed, the setting is not available in the current video input mode. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. • Make sure that the Button Lock option is set to Off. See "Locking control buttons" in the online User Guide. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. • Make sure that the sleep timer is not turned on. See "Setting the sleep timer" in the online User Guide. Notes • • If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Additional troubleshooting information is in your online User Guide. Go to www.insigniaproducts.com, click Support & Service, enter your model number in the Product Search field, then click Search. Specifications NS-46E481A13 Specifications are subject to change without notice. Dimensions and weight Without stand With stand 42.3 × 25.24 × 2.28 in. (107.48 × 64.1 × 5.8 cm) 45.2 lbs. (20.5 kg) 42.3 × 27.6 × 9.8 in. (107.48 × 70.2 × 25 cm) 49.6 lbs. (22.5 kg) Screen Screen size measured diagonally Display type Panel 60 Hz vs.120 Hz Display resolution Panel resolution Aspect ratio Contrast ratio (typical)-panel Dynamic contrast ratio- list value Brightness (center typical) cd/m2 Comb filter Response time Horizontal viewing angle Vertical viewing angle 46 in. LED 120Hz 1080p 1920 (H) × 1080 (V) 16:9 3000:1 15,000:1 300 nits 3d y/c digital 8 ms 160° 160° Display resolutions/VGA scan rates HDMI 1.3 Component video PC/VGA 1080p, 1080i, 720p, 480p, 480i 1080i, 720p, 480p, 480i 640 × 480/60Hz, 800 × 600/60Hz, 1024 × 768/60Hz, 1280 × 1024/60Hz, 1680 × 1050/60Hz, 1920 × 1080/60Hz Tuner Analog Digital NTSC ATSC, 8-VSB, Clear-QAM Inputs HDMI/DVI Component video Composite video Shared audio (component and composite) S-Video PC/VGA 3.5mm PC audio input USB 2 (back), 1 (side) E-EDID compliant HDCP compliant 1 (back) 1 (side) No No 1 (side) 1 (side) 1 (back) Supports JPEG and firmware upgrade www.insigniaproducts.com 5