Insignia NS-46E570A11 User Manual (English) - Page 16

NS-42E570A11/NS-46E570A11 Insignia 42"/46" LED-LCD TV, 120Hz 1080p Connecting a computer To connect a computer: 1 Make sure that your TV's power cord is unplugged and the computer is turned off. 2 Connect a VGA cable (not included) to the PC IN jack on the back of your TV and to the VGA jack on the computer. Back of TV Connecting headphones The TV speakers are muted when headphones are attached. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound. To connect headphones: • Connect headphones to the on the side of your TV. Side of TV 3 Connect an audio cable to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jack on the computer. 4 Turn on your TV, then turn on the computer. 5 Press INPUT to open the Source List. 6 Press or to highlight VGA, then press OK/ENTER. Note When the computer enters Standby mode, your TV turns off. If your TV does not turn on when you "wake" your computer, press (power) on your TV or remote control. For HDMI-DVI input from PC, the TV will enter Standby mode after one minute if no signal is detected. Connecting a digital sound system To connect a digital sound system: • Connect a digital audio cable to the SPDIF jack on the side of your TV and to the digital audio jack on the amplifier. Digital sound system Side of TV 12 www.insigniaproducts.com