Insignia NS-46E790A12 User Manual (English) - Page 9
Installing the stand or wall-mount bracket, Installing the stand, Installing a wall-mount bracket - led
View all Insignia NS-46E790A12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Insignia 46" LED-LCD HDTV, 1080p Installing the stand or wall-mount bracket Notes If you plan to wall-mount your TV, do not install the stand. Store the stand and stand screws in case you decide to use the stand in the future. Installing the stand To install the stand: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. Installing a wall-mount bracket Warning This apparatus is intended to be supported by a UL Listed wall mount bracket with a suitable weight/load rating. (See "Miscellaneous" on page 50.) To attach your TV to a wall-mount bracket: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws that secure the cover, then remove the cover. 2 Secure the stand to the screen with the four provided screws. Model Screw type Screw length NS-46E790A12 M6 type 12 mm 3 Secure the flat stand cover to the back of your TV using the four screws you just removed. Note The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths. 15.68 in. (400 mm) 15.68in. (400 mm) www.insigniaproducts.com Wall mount brackets 5