Insignia NS-50D400NA14 User Manual (English) - Page 18
Using DVI (same as HDMI but requires an audio connection)
View all Insignia NS-50D400NA14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
NS-46D400NA14/NS-50D400NA14 Insignia 46/50" LED TV Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI 3/DVI jack to connect a cable or satellite box. If you use another HDMI jack, you will not hear sound from the TV speakers. Side of TV On your TV Cable or satellite box HDMI cable 3.5mm audio connector cable connector HDMI 3/DVI PC/DVI jack AUDIO IN jack HDMI cable with HDMI-DVI adapter 3.5mm audio cable To connect a cable or satellite box using DVI: 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI 3/DVI jack on the side of your TV. 5 Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the audio out jacks on the cable or satellite box. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 6 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Press INPUT to open the INPUT SOURCE list. 8 Press S or T to select HDMI3, then press ENTER. 14 www.insigniaproducts.com