Insignia NS-50DF710NA19 Quick Setup Guide - Page 1

QUICK SETUP GUIDE 43"/50"/55"/58" 60 Hz LED TV 4K ULTRA HD NS-43DF710NA19 / NS-50DF710NA19 / NS-55DF710NA19 / NS-58DF620NA20 / NS-50DF711SE21 INCLUDED ACCESSORIES Voice Remote with Alexa and two AAA batteries ++ AAA AAA TV stands 43" 50" 55" 58" M4 screws (20 mm length) (4 pcs.) Power cord STOP Before using your new product, please read these instructions to prevent any damage. Do not plug your power cord in until all other devices have been connected. 1 INSTALLING THE STANDS OR A WALL MOUNT Place your TV face-down on a cushioned, clean surface. STANDS 1 Align the TV stand screw holes with the holes on your TV's bottom. 2 Use a Phillips screwdriver and two provided screws to secure each stand to your TV. M4 × 20 mm screws R 43" TV shown L M4 × 20 mm screws WALL MOUNT Before you mount your TV, make sure that: • You remove the stands. • The wall-mount bracket supports the weight of your TV. See the instructions that came with your wall mount for more information about how to correctly mount your TV. WARNING: Your TV has four VESA mounting holes on the back. You must secure a wall-mount bracket to all four holes. If you do not use all four holes, your TV may fall and cause property damage or personal injury. Note: Wall-mount screws are not included. 43" TV shown 43" VESA Mounting Pattern 200 × 200 mm Screws: type M6, 12 mm to 14 mm length depending on the wall mount 50" VESA Mounting Pattern 200 × 200 mm Screws: type M6, 12 mm to 15 mm length depending on the wall mount 55" VESA Mounting Pattern 200 × 200 mm Screws: type M6, 12 mm to 14 mm length depending on the wall mount 58" VESA Mounting Pattern 300 × 200 mm Screws: type M6, 12 mm to 14 mm length depending on the wall mount FEATURES Power indicator Remote control sensor 43" TV shown AUDIO OUT USB HDMI1 (ARC) USB HDMI1 (ARC) HDMI2 HDMI2 ETHERNET DIGITAL OPTICAL OUTPUT VIDEO L AUDIO R AV IN ANT/CABLE HDMI3 Note: Images do not necessarily represent the exact design of your television. 2 MAKING CONNECTIONS HDMI (best video quality) Note: You can use the HDMI 1 (ARC) jack to connect a digital audio system. AV (good video quality) AUDIO/VIDEO OUT Coaxial (good video quality) HD Connect an antenna to access live over-the-air TV. AUDIO OUT DIGITAL OPTICAL OUTPUT HDMI1 (ARC) HDMI2 HDMI3 HDMI OPTIONS VIDEO L AUDIO R AV IN ANT/CABLE ETHERNET ANALOG L R AUDIO IN SOUNDBAR AUDIO OPTIONS DIGITAL OPTICAL AUDIO IN SOUNDBAR You can use the DIGITAL OPTICAL OUTPUT jack or the HDMI 1 (ARC) jack. Note: If you need to change the digital audio format, go to the Home menu, select Settings, then select Display & Sounds. Select Audio Output, then select Digital Audio Format and change the setting to PCM or Dolby Digital. ETHERNET (optional) ETHERNET Note: You can use a wired Ethernet connection to access the internet, instead of a WiFi connection. Plug an Ethernet cable into the ETHERNET jack on your TV and your Ethernet connection.