Insignia NS-55E480A13A User Manual (English) - Page 16
Using composite video good, Using coaxial good
View all Insignia NS-55E480A13A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
NS-46E480A13A/NS-55E480A13A Insignia 46"/55" 1080p LED TV Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an A/V cable (not provided) to the COMPONENT/AV Y/VIDEO jack and L and R audio jacks on the back of your TV and to the composite video and audio out jacks on the cable or satellite box. Note • • The COMPONENT/AV Y/VIDEO, PB, and PR video jacks (used to connect a component device) share the L and R audio jacks with the COMPONENT/AV Y/VIDEO jack (used to connect a composite device). When you connect the audio using the L and R audio jacks, the audio output is analog. Cables are often color-coded to match color-coded jacks. Note: The yellow video connector on the AV cable connects to the green COMPONENT/AV Y/VIDEO jack. Cable or satellite box Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE jack on the back of your TV and to the coaxial out jack on the cable or satellite box. Cable or satellite box Y / VIDEO PB PR L R Back of TV A/V cable Coaxial cable Y / VIDEO PB PR L R Back of TV 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 21. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 21. 12 www.insigniaproducts.com